Contact : +33 1 41 23 50 30 (9:00 – 17:00 CEST)

1-pair DIN rail plug-in Data surge protector

DLATS1-170/R
Part Number 6417054
DLATS1-170/R
  • 1-pairdataline/telecom surge protection
  • Local and Remote signaling of SPD status
  • DIN rail mounting, Screw connect status
  • Plug-in module
  • 1 monitoring module + SPD modules (up to 48) + bus
  • Discharge current Imax/In: 20 kA /5kA
  • Complies with IEC/EN 61643-21 and UL497A

DLA surge protectors are designed to protect, against surge voltages due to lightning, terminals equipment connected to industrial buses, telecom lines or datalines. These surge protectors must be installed on symmetrical DIN rail and are available for most of the transmission lines: line voltage from 6 to 170V, bitrate up to 10 Mbit/s. These products are 1-pair surge protectors with removable module for easy maintenance.


Network
RTC, ADSL2, VDSL2
Nominal line voltage
Un 150 V
Max. DC operating voltage
Uc 170 Vdc
Max. frequency
f max. 10 MHz
Insertion loss
< 1 dB
Max. load current
@25°C
IL 300 mA
Max. discharge current
max. withstand @ 8/20 µs by pole
Imax 20 kA
Line inductance
No
Protection mode(s)
Common/Differential mode
Protection level
Following the test category C3 (IEC61643-21) - Line/Line
Up 220 V
Impulse current
2 x 10/350µs Test - D1 Category
Iimp 5 kA
Nominal discharge current
C2 Category
In 5 kA
Line/Line Nominal discharge current
C2 Category
In L/L 5 kA
Nominal Discharge Current, X-C (Line/Earth)
8/20µs Test x 10 - C2 Category
In L/PE 5 kA
Network type
Data Communication
Technology
GDT+Clamping diode+PTC (thermal resistor) + Resistor
SPD configuration
1-pair+shielded
Connection to Network
Spring terminal: cross section 0.5-2.5mm²
Format
Plug-in DIN box
Mounting
Symmetrical rail 35 mm (EN 60715)
Housing material
Thermoplastic UL94 V-0
Operating temperature
Tu -40/+85°C
Protection rating
IP20
Failsafe mode
Transmision cut-off - fault mode 2
Disconnection indicator
Red light on
Spare module(s)
DLATS1M-170
Remote signaling of disconnection
Trough control module
Remote signaling of disconnection via control module
Yes
Dimensions
See diagram
Weight
0.066 kg
Standards compliance
IEC 61643-21 / EN 61643-21 / UL497A