Contact : +33 1 41 23 50 23 (9:00 – 17:00 CEST)

1-pair DIN rail plug-in Data surge protector

DLATS1-12D3
Part Number 6417021
DLATS1-12D3
Availability:
€106.00 (excl. tax)
Add to cart

Available within 3 weeks

  • 1-pairdataline/telecom surge protection
  • Local and Remote signaling of SPD status
  • DIN rail mounting, Screw connect status
  • Plug-in module
  • 1 monitoring module + SPD modules (up to 48) + bus
  • Discharge current Imax/In: 20 kA /5kA
  • Complies with IEC/EN 61643-21 and UL497B
Contact Us
DLA surge protectors are designed to protect, against surge voltages due to lightning, terminals equipment connected to industrial buses, telecom lines or datalines. These surge protectors must be installed on symmetrical DIN rail and are available for most of the transmission lines: line voltage from 6 to 170V, bitrate up to 10 Mbit/s. These products are 1-pair surge protectors with removable module for easy maintenance.
Network

RS232, RS485
Nominal line voltage
 Un

12 V
Max. DC operating voltage
 Uc

15 Vdc
Max. frequency
 f max.

3 MHz
Insertion loss

< 1 dB
Max. load current @25°C
 IL

300 mA
Max. discharge current
max. withstand @ 8/20 µs by pole
 Imax

20 kA
Protection mode(s)

Common/Differential mode
Protection Level
C3 (10/1000μs), 300 applications@10 A, X-X (Line/Line)
 Up

30 V
Protection level
C3 (10/1000μs), 300 applications@10 A, X-C (Line/Earth)
 Up

30 V
Impulse current
2 x 10/350µs Test - D1 Category
 Iimp

5 kA
Nominal discharge current
C2 Category
 In

5 kA
Line/Line Nominal discharge current
C2 Category
In L/L

5 kA
Nominal Discharge Current, X-C (Line/Earth)
8/20µs Test x 10 - C2 Category
 In L/PE

5 kA
Line resistance (± 10%)

4.7 Ohm
Network type

Data Communication
Technology

GDT+Clamping diode+PTC (thermal resistor) + Resistor
SPD configuration

1-pair+shielded
Connection to Network

By screw terminal: cross section 0.5-2.5mm²
Format

Plug-in DIN box
Mounting

Symmetrical rail 35 mm (EN 60715)
Housing material

Thermoplastic UL94 V-0
Operating temperature
 Tu

-40/+85°C
Protection rating

IP20
Failsafe mode

Transmision cut-off - fault mode 2 (short circuit)
Disconnection indicator

Red light on
Spare module(s)

DLATSM1-12D3
Remote signaling of disconnection

Trough control module
Remote signaling of disconnection via control module

With attached seperated module
Connection bus

SPD connection/control module by bus: bus 1+4 (1control module+4 SPD), bus 1+9, bus 1+24 and bus 1+48
Dimensions

See diagram
Weight

0.067 kg
Standards compliance

IEC 61643-21 / EN 61643-21 / UL497B