Contact : +33 1 41 23 50 23 (9:00 – 17:00 CEST)

DC power surge protector - 220 Vdc

DS240S-220DC
Part Number 310211
DS240S-220DC
  • Discover our latest innovation : the DDC40CS-20-275
  • DC power surge protector
  • 220 Vdc
  • Compact design
  • Imax: 40 kA
  • Pluggable module
  • Remote signaling
  • Very low Up protection level

DS210-DC surge protectors are designed to protect equipment connected to DC (and AC) power supplies from lightning surges. It is based on varistors matched to the network voltage: the varistors have thermal disconnection devices to control any end-of-life. These SPD are DIN rail compatible and is connected in parallel on the line to be protected.


SPD type
2
Network
DC or PV network 220Vdc
Nominal DC voltage
Un-dc 220 Vdc
Nominal PV voltage
Uocstc 220 Vdc
Max. AC operating voltage
Uc 210 Vac
Max. PV operating voltage
Ucpv 275 Vdc
Max. DC operating voltage
Uc 275 Vdc
Residual Current
Leakage current to Ground
Ipe < 0.1 mA
Operating current
Continious current at Uc
Ic < 0.1 mA
PV Permanent Operating current
Current consumption at Ucpv
Icpv < 0.1 mA
Follow current
If None
Nominal discharge current
15 x 8/20 µs impulses
In 20 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
Imax 40 kA
Total Maximum discharge current
max. total withstand @ 8/20 µs
Imax Total 80 kA
Current withstand short circuit PV
Iscpv 1000 A
Connection mode(s)
+/-/PE
Protection mode(s)
Common mode
Protection level +/PE (-/PE)
@ In (8/20µs)
Up 900 V
Technology
MOV
SPD configuration
2-poles
Connection to Network
By screw terminals: 1.5-10mm² (actives wires) and 2.5-25mm² (ground)
Format
Plug-in modular box
Mounting
Symmetrical rail 35 mm (EN 60715)
Housing material
Thermoplastic UL94 V-0
Operating temperature
Tu -40/+85°C
Protection rating
IP20
Outdoor application
No
Failsafe mode
Disconnection from DC network
Disconnection indicator
2 mechanical indicators
Spare module(s)
DSM240-220DC
Remote signaling of disconnection
Output on changeover contact
Dimensions
See diagram
Standards compliance
IEC 61643-11 / EN 61643-11 / UL1449 ed.5
Certification
Thermal disconnector
Internal
Back-up protection device
Fuses type gG - 20A