Type 1+2+3 AC surge protector - 3-phase+N
ZPAC1-8VG-PRO-SU
Part Number: 64085
- Type 1 + 2 + 3 multipolar surge protector
- For 40 mm Busbar system
- Gas Discharge Tube technology
- Iimp 8 kA (10/350 μs)
- RFZ and APZ Power Supply
- Plug-in protection modules
- Integrated safety device
- Tool-free installation
- With remote signaling
- "DE-AR-N 4100 compliant" Use of overvoltage protection devices (SPD) type 1 in main power supply systems
- Compliance IEC 61643-11 and EN 61643-11
Datasheet
Select another reference:
| SPD type | 1+2+3 | |
| Network | 230/400 V 3-phase+N | |
| AC system | TT-TNS | |
| Nominal line voltage | Un | 230/400 Vac |
| Max. AC operating voltage | Uc | 275 Vac |
| Temporary Over Voltage (TOV) Charasteristics - 5 sec. | UT | 335 Vac withstand |
| Temporary Over Voltage (TOV) Charasteristics - 120 mn | UT | 440 Vac withstand |
| Temporary Over Voltage N/PE (TOV HT) | UT | 1200 V/300A/200 ms withstand |
| Residual Current | Ipe | None |
| Operating current | Ic | None |
| Follow current | If | None |
| Nominal discharge current | In | 20 kA |
| Max. discharge current | Imax | 50 kA |
| Impulse current by pole | Iimp | 8 kA |
| Total lightning current | Itotal | 32 kA |
| Withstand on Combination waveform IEC 61643-11 | Uoc | 6 kV |
| Withstand on overvoltages IEEE C62.41.1 | 20 kV | |
| Specific energy by pole | W/R | 16 kJ/ohm |
| Connection mode(s) | L/N and N/PE | |
| Protection mode(s) | Common/Differential mode | |
| Protection level L/N | Up L/N | 1.5 kV |
| Protection level L/PE | Up L/PE | 1.5 kV |
| Residual voltage L/N at 5 kA | Up-5kA | 0.7 kV |
| Admissible short-circuit current | Isccr | 50 000 A |
| Technology | VG Technology (MOV+GSG) | |
| SPD configuration | 3-phase+Neutral | |
| Connection to Network | By screw terminals: 2.5-25 mm² / by bus | |
| Format | Plug-in modular box | |
| Mounting | 40 mm busbar systems | |
| Housing material | Thermoplastic UL94 V-0 | |
| Operating temperature | Tu | -40/+85°C |
| Protection rating | IP20 | |
| Failsafe mode | Disconnection | |
| Disconnection indicator | 1 mechanical indicator by pole | |
| Spare module(s) | ZMDAC1-8VG-PRO-275 | |
| Remote signaling of disconnection | Output on changeover contact | |
| Wiring for remote signaling | 1.5 mm² max. | |
| Max. Voltage/Current for remote signaling | 250 V / 0.5 A (AC) / 30 V / 2 A (DC) | |
| Dimensions | See diagram |
| Standards compliance | IEC 61643-11 / EN 61643-11 / UL1449 4ed. | |
| Certification | EAC |
| Thermal disconnector | Internal | |
| Installation ground fault breaker | Type 'S' or delayed | |
| Fuses | max. 315 A (gL/gG) |
