Contact : +33 1 41 23 50 23 (9:00 – 17:00 CEST)
1-pair DIN rail plug-in Data surge protector
DLAS1-06D3
Part Number 6415011
Available within 3 weeks
- 1-pair Pluggable SPD for dataline
- Visual indicator in failsafe behaviour
- Without line cut-off
- Line voltage 6 Vdc
- Din rail mounting, Screw terminals
- IEC/EN 61643-21 and UL497B compliance
Datasheet
DLAS1 surge protectors are designed to protect, against surge voltages due to lightning, terminals equipment connected to industrial buses, telecom lines or datalines.
These surge protectors must be installed on symmetrical DIN rail and are available for most of the transmission lines: line voltage from 6 to 170V, bitrate up to 10 Mbit/s.
These products are 1-pair surge protectors with removable module for easy maintenance.
Select another reference:
|
Network
|
RS422 | |
|
Nominal line voltage
|
Un | 6 V |
|
Nominal line voltage
|
Un | 24 V |
|
Max. DC operating voltage
|
Uc | 8 Vdc |
|
Max. frequency
|
f max. | > 3 MHz |
|
Max. load current @25°C
|
IL | 300 mA |
|
Max. discharge current
max. withstand @ 8/20 µs by pole
|
Imax | 20 kA |
|
Line inductance (± 10 %)
|
non | |
|
Protection Level
C3 (10/1000μs), 300 applications@10 A, X-X (Line/Line)
|
Up | 20 V |
|
Protection level
C3 (10/1000μs), 300 applications@10 A, X-C (Line/Earth)
|
Up | 20 V |
|
Impulse current
2 x 10/350µs Test - D1 Category
|
Iimp | 5 kA |
|
Line/Line Nominal discharge current
C2 Category
|
In L/L | 5 kA |
|
Nominal Discharge Current, X-C (Line/Earth)
8/20µs Test x 10 - C2 Category
|
In L/PE | 5 kA |
|
Line resistance (± 10%)
|
4.7 Ohm |
|
Network type
|
Data Communication | |
|
Technology
|
GDT+Clamping diode+PTC (thermal resistor) + Resistor | |
|
SPD configuration
|
1-pair+shielded | |
|
Connection to Network
|
By screw terminal: cross section 0.5-2.5mm² | |
|
Format
|
Plug-in DIN box | |
|
Mounting
|
Symmetrical rail 35 mm (EN 60715) | |
|
Housing material
|
Thermoplastic UL94 V-0 | |
|
Operating temperature
|
Tu | -40/+85°C |
|
Protection rating
|
IP20 | |
|
Failsafe mode
|
Opening line - transmision cut-off - fault mode 2 | |
|
Disconnection indicator
|
Visual indicator is red | |
|
Spare module(s)
|
DLAS1M-06D3 | |
|
Dimensions
|
See diagram |
|
Standards compliance
|
IEC 61643-21 / EN 61643-21 / UL497B | |
|
Certification
|
SIL |
