Contact : 01 41 23 50 35 (9h - 17h)

Outdoor POE++ in-line surge protector

CRMJ8-POE-C6A
Part Number: 581542
CRMJ8-POE-C6A
  • POE++ compatible
  • Category 6A compatible
  • RJ45 Shielded connectors
  • IEC 61643-21, EN 61643-21
  • Outdoor application: IP67 rating
  • Metallic enclosure
  • Certified UL497B
Contact Us
The CxMJ8-POE-C6A is an outdoor PoE surge protector designed to protect sensitive data-processing equipment connected to a PoE (Power over Ethernet) network cabling Category 6 and Ethernet 10Gigabit from transient overvoltages. These SPDs are now qualified with the maximum transmission speed and cabling category used for these Ethernet networks: 10Gigabit Ethernet and Category 6A. Obviously, These new SPDs are applicable for the Ethernet networks with lower categories. The CMJ8-POE surge protector is deployed in signal network applications with data transmission speeds up to1000 Mbps and is equipped with high quality shielded RJ45 connectors.
Select another reference:
Network POE ++ and 10Gigabit Ethernet
Nominal line voltage Un 48 Vdc
Max. DC operating voltage Uc 60 Vdc - 650 mA
Max. frequency f max. 500 MHz
Max. data rate 10/100/1000 Mbps
Insertion loss < 1 dB
Max. load current IL 2000 mA
Protection level Up 70 V
Impulse current Iimp 500 A
Line/Line Nominal discharge current In L/L 500 A
Line/Ground Nominal discharge current In L/PE 2000 A
Technology GDT+Clamping diode
SPD configuration 8 wires+shielded
Connection to Network RJ45 shielded connectors Female input/output
Format Metal Box with connectors input/output - Reinforced seal
Mounting On plate or pole
Housing material Aluminum cast
Operating temperature Tu -40/+85°C
Protection rating IP66
Outdoor application Yes
Failsafe mode Short-circuit
Spare module(s) CRMJ8-POE-C6A/PCB
Pinout (1-2)(3-6)(4-5)(7-8)
Dimensions See diagram
Weight 1.304 kg
Standards compliance IEC 61643-21/ EN 61643-21 / UL497B IEEE 802-3af/3at/3bt/ ANSI/TIA-568-C.1
Certification UL497B