Contact : +33 1 41 23 50 30 (9:00 – 17:00 CEST)

10 gigabit POE ++ surge protector

Part Number 581544
  • POE++ compatible
  • Category 6A compatible
  • RJ45 Shielded connectors
  • IEC 61643-21, EN 61643-21
  • Outdoor application: IP66 rating
  • Certified UL497B

The new CWMJ8-POE-C6A product is designed to protect POE ++ and Ethernet Category 6A networks. The product is equipped with RJ45 shielded connectors for fast wiring. It completes the existing range of CITEL PoE surge protectors (CRMJ8-POE-C6A with metal enclosure, for outdoor application & MJ8-POE-C6A for indoor use). Based on hybrid diagram made with gas tubes and low capacitance clamping diodes, this surge protector is ideally suited for PoE-connected devices as IP cameras or WiFi hotspots. The product is designed for wall mounting and outdoor application, notably through his protection rating (IP66) and its UV rated thermoplastic (UL94-V0). Note, thanks to its design and modern appearance the product can also be installed indoor.

Select another reference:

POE ++ and 10Gigabit Ethernet
Nominal line voltage
Un 48 Vdc
Max. DC operating voltage
Uc 60 Vdc
Max. frequency
f max. 500 MHz
Max. data rate
10 Gbps (6A)
Insertion loss
< 1 dB
Max. load current
IL 2000 mA
Protection level
Following the test category C3 (IEC61643-21) - Line/Line
Up 70 V
Impulse current
2 x 10/350µs Test - D1 Category
Iimp 500 A
Line/Line Nominal discharge current
C2 Category
In L/L 500 A
Nominal Discharge Current, X-C (Line/Earth)
8/20µs Test x 10 - C2 Category
In L/PE 2000 A
GDT+Clamping diode
SPD configuration
8 wires+shielded
Connection to Network
RJ45 shielded connectors Female input/output
Plastic Box with connectors input/output - Reinforced seal
Wall - Outdoor and Indoor
Accessory(s) provided
screw + nut + cable shoe
Housing material
Thermoplastic UL94 V-0
Operating temperature
Tu -40/+85°C
Protection rating
Outdoor application
Failsafe mode
See diagram
0.291 kg
Standards compliance
IEC 61643-21/ EN 61643-21 / UL497B IEEE 802-3af/3at/3bt/ ANSI/TIA-568-C.1
UL 497B