Contact : +33 1 41 23 50 23 (9:00 – 17:00 CEST)

Compact single-phase type 2 (or 3) surge protector - Monobloc

DACN15-P11-275/INV
Part Number 70146023
DACN15-P11-275/INV
  • Type 2 or 3 surge protectors with bottom connection
  • Compact Single-phase
  • In: 5 kA
  • Imax: 15 kA
  • Commun/Differential mode
  • Monobloc module
  • EN 61643-11, IEC 61643-11, and UL1449 ed.5 compliance
Contact Us
The DACN15-P surge protections are usable for all single-phase AC applications. Type 2, these products maintain a Nominal discharge current (In) of 5 kA and a Maximum discharge current (Imax) of 15 kA. According to the IEC standards, a product with an In of 5 kA can be installed in the main panel, but it can also be placed in the secondary panel, downstreaming the primary SPD. The new product DACN15-P11-275/INV with an inverted base, allowing bottom cabling for special applications extending the series.
SPD type
IEC 2 (or 3)
Network
 230/400 V
AC system
 TT-TN
Max. AC operating voltage
Uc 275 Vac
Temporary Over Voltage (TOV) Characteristics - 5 sec.
Without disconnection
 UT 335 Vac withstand
Temporary Over Voltage (TOV) Characteristics - 120 mn
Without disconnection or with safety disconnection
 UT 440 Vac disconnection
Temporary Over Voltage N/PE (TOV HT)
Without disconnection or with safety disconnection
 UT 1200 V/300A/200 ms withstand
Residual Current
Leakage current to Ground
 Ipe None
Follow current
If None
Nominal discharge current
15 x 8/20 µs impulses
 In 5 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
 Imax 15 kA
Withstand on Combination waveform IEC 61643-11
Class III test: 1.2/50µs - 8/20µs
 Uoc 10 kV
Protection mode(s)
 L/N and N/PE
Protection level L/N
@ In (8/20µs)
 Up L/N 1.1 kV
Protection level N/PE
@ In (8/20µs)
 Up N/PE 1.5 kV
Admissible short-circuit current
 Isccr 10 000 A
Technology
 MOV+GDT
SPD configuration
 Single phase
Connection to Network
 Bottom connection, by screw terminals: 1.5-10mm²
Compact
 Yes
Format
 Monobloc modular box
Plugable
 No
Mounting
 Symmetrical rail 35 mm (EN 60715)
Housing material
 Thermoplastic UL94 V-0
Operating temperature
 Tu -40/+85°C
Protection rating
 IP20
Failsafe mode
 Disconnection from AC network
Disconnection indicator
 Green LED OFF
Dimensions
 See diagram - 1TE (EN43880)
Weight
 0.093 kg
Standards compliance
 IEC 61643-11 / EN 61643-11 / UL1449 ed.5
Thermal disconnector
 Internal
Installation ground fault breaker
 Type 'S' or delayed
Back-up protection device
20 A min. - 125 A max. - Fuses type gG