Contact : +33 1 41 23 50 23 (9:00 – 17:00 CEST)

Type 1+2+3 AC surge protector - 3-phase+N

DACN1-25CVGS-31-385
Part Number 64162
DACN1-25CVGS-31-385
  • Type 1 + 2+3 AC surge protector
  • VG Technology
  • Iimp: 25 kA on 10/350µs impulse
  • In: 25 kA
  • Optimized to TOV
  • No leakage current
  • Monobloc
  • Remote signaling
  • EN 61643-11, IEC 61643-11 Certified

Type 1+2+3 DACN1-25CVGS surge arresters provide effective protection for low-voltage networks against original surges. Based on VG technology, they guarantee high flow capacity (Iimp 25 kA) without leakage current, and optimized TOV resistance. Compact and monobloc, they integrate a thermal disconnector, a mechanical indicator and a remote signalling output, offering a reliable and durable solution for electrical installations. The SC version also incorporates an overvoltage meter.


SPD type
IEC

1+2+3

Network

230/400 V 3-phase+N

AC system

TT-TNS

Max. AC operating voltage
Uc

385 Vac

Temporary Over Voltage (TOV) Characteristics - 5 sec.
Without disconnection
UT

500 Vac withstand

Temporary Over Voltage (TOV) Characteristics - 120 mn
Without disconnection or with safety disconnection
UT

650 Vac disconnection

Temporary Over Voltage N/PE (TOV HT)
Without disconnection or with safety disconnection
UT

1200 V/300A/200 ms withstand

Residual Current
Leakage current to Ground
Ipe

None

Follow current
If

None

Nominal discharge current
15 x 8/20 µs impulses
In

25 kA

Nominal discharge current N/PE
15 x 8/20 µs impulses
In N/PE

100 kA

Max. discharge current
max. withstand @ 8/20 µs by pole
Imax

100 kA

Max. discharge current N/PE
max. withstand @ 8/20 µs by pole
Imax N/PE

100 kA

Impulse current by pole
max. withstand 10/350µs by pole
Iimp

25 kA

Total lightning current
max. total withstand @ 10/350µs
Itotal

100 kA

Withstand on Combination waveform IEC 61643-11
Class III test: 1.2/50µs - 8/20µs
Uoc

6 kV

Protection level L/N
@ In (8/20µs)
Up L/N

1.5 kV

Protection level N/PE
@ In (8/20µs)
Up N/PE

1.5 kV

Admissible short-circuit current
Isccr

50 000 A

Technology

VG Technology (MOV+GSG)

SPD configuration

3-phase+Neutral

Connection to Network

By screw terminals: 2.5-25mm² (35mm² rigid)

Compact

Yes

Format

Monobloc modular box

Plugable

No

Mounting

Symmetrical rail 35 mm (EN 60715)

Housing material

Thermoplastic UL94 V-0

Operating temperature
Tu

-40/+85°C

Protection rating

IP20

Failsafe mode

Disconnection from AC network

Disconnection indicator

1 mechanical indicator - Red/Green

Remote signaling of disconnection

Output on changeover contact

Wiring for remote signaling

1.5 mm² max.

Max. Voltage/Current for remote signaling

250 V / 0.5 A (AC) / 30 V / 3 A (DC)

Weight

0.658 kg

Standards compliance

EN 61643-11 / IEC 61643-11

Certification

KEMA

Thermal disconnector

Internal

Installation ground fault breaker

Type 'S' or delayed

Back-up protection device

315 A max. - Fuses Type gG / or SFD1-25S