Coaxial surge protector 3.5 GHz
P8AX09-N/MF
Part Number: 60001
- RF coaxial surge protector
- 3.5 GHz
- Connectors : N
- Low insertion loss
- Removale GDT
- DC-pass
- Bi-directional protection
Installation Sheet
The P8AX series is based on gas discharge tube (GDT) and designed for RF line surge protection. Available for different power and with coaxial connectors, P8AX units could be provide in feedthrough mounting version and with various impedance.
Select another reference:
- P8AX09-716/FF
- P8AX09-716/MF
- P8AX09-B/FF
- P8AX09-B/MF
- P8AX09-F/FF
- P8AX09-F/MF
- P8AX09-N/FF
- P8AX09-N/MF
- P8AX09-SMA/FF
- P8AX09-SMA/MF
- P8AX09-T/FF
- P8AX09-T/MF
- P8AX15-B/FF
- P8AX15-B/MF
- P8AX15-N/FF
- P8AX15-N/MF
- P8AX15-SMA/FF
- P8AX15-SMA/MF
- P8AX25-716/FF
- P8AX25-716/MF
- P8AX25-B/FF
- P8AX25-B/MF
- P8AX25-F/FF
- P8AX25-F/MF
- P8AX25-N/FF
- P8AX25-N/MF
- P8AX25-SMA/FF
- P8AX25-SMA/MF
- P8AX25-T/FF
- P8AX25-T/MF
- P8AX50-716/FF
- P8AX50-716/MF
- P8AX50-N/FF
- P8AX50-N/MF
- P8AX60-N/FF
| Max. load current |
10 A |
| Max. frequency |
DC-3.5GHz |
| Insertion loss |
< 0.2dB |
| Residual Current Leakage current to Ground |
none |
| Max. discharge current max. withstand @ 8/20 µs by pole |
20 kA |
| Protection mode(s) |
Common mode |
| Protection level @ In (8/20µs) |
< 700 V |
| Impulse current 2 x 10/350µs Test - D1 Category |
1 kA |
| Nominal discharge current 8/20µs Test x 10 - C2 Category |
5 kA |
| Impedance | 50 ohms |
| Max Power | 25 W |
| Return loss | > 20 dB |
| VSWR | <1.2:1 |
| DC Pass | True |
| Insulation resistance | ≥10 GOhms |
| Technology | Gas discharge tube |
| Connection to Network | connector N Male/Female |
| Mounting | Feedthrough |
| Housing material | Brass/Surface plating : Cu Zn Sn |
| Operating temperature | -40/+85°C |
| Protection rating | IP66 |
| Outdoor application |
Yes |
| Failsafe behavior | Short-circuit |
| Disconnection indicator | Transmission interrupt |
| Spare module(s) |
BBHF-90V |
| Dimensions |
See diagram |
| Contacts | Bronze/Surface Au-Ag |
| Insulation material | PTFE |
| RohS compliance |
Yes |
| Standards compliance | IEC 61643-21 / EN 61643-21 / UL497C / UL497E |
