Contact : +33 1 41 23 50 30 (9:00 – 17:00 CEST)

Type 1+2 PV surge protector - 1500 Vdc

DS60VGPV-600G/51
Part Number 3963
DS60VGPV-600G/51
  • Type 1+2 surge protector for photovoltaic
  • VG technology
  • 600 Vdc
  • No leakAge, no operating currents
  • Improved life expectancy
  • Iimp: 12.5 kA/pole
  • Common/Differential mode protection
  • Remote signaling
  • IEC 61643-31, EN 61643-31, EN 50539-11, UL1449 ed.5 compliance
Contact Us
DS60VGPV/51 are type 1+2 heavy duty surge protectors are designed to protect against lightning surge voltages in photovoltaic power supply network. These protectors are recommended when a direct lightning strike is possible on the installation. The DS60VGPV/51 SPDs may withstand up to 12.5 kA 10/350µs, it incorporates CITEL's exclusive patented 'VG technology'
SPD type
1+2
Network
 PV 600 Vdc
Nominal PV voltage
 Uocstc 600 Vdc
Max. PV operating voltage
 Ucpv 720 Vdc
Residual Current
Leakage current to Ground
 Ipe None
PV Permanent Operating current
Current consumption at Ucpv
 Icpv None
Follow current
If None
Nominal discharge current
15 x 8/20 µs impulses
 In 20 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
 Imax 40 kA
Impulse current by pole
max. withstand 10/350µs by pole
 Iimp 12.5 kA
Total lightning current
max. total withstand @ 10/350µs
 Itotal 25 kA
Current withstand short circuit PV
 Iscpv 15 000 A
Connection mode(s)
 +/-/PE
Protection mode(s)
 Common/Differential mode
Protection level +/-
@ In (8/20µs)
 Up 2.8 kV
Protection level +/PE (-/PE)
@ In (8/20µs)
 Up 2.2 kV
Technology
 VG Technology (MOV+GSG)
Connection to Network
 By screw terminals: 6-35mm²
Format
 1-pole modular box
Mounting
 Symmetrical rail 35 mm (EN 60715)
Housing material
 Thermoplastic UL94 V-0
Operating temperature
 Tu -40/+85°C
Protection rating
 IP20
Failsafe mode
 Disconnection SPD of the PV line
Disconnection indicator
 1 mechanical indicator
Remote signaling of disconnection
 Output on changeover contact - 250 Vac/0.5 A (AC) - 30 Vdc/3A (DC)
Dimensions
 See diagram
Weight
 0.252 kg
Standards compliance
 IEC 61643-31 / EN 61643-31 / EN 50539-11 / UL1449 ed.5
Certification
Thermal disconnector
 Internal
Back-up protection device
Without