Contact : +33 1 41 23 50 30 (9:00 – 17:00 CEST)

Coaxial surge protector for video transmission networks

CNP06 F/FF
Part Number 632602
CNP06 F/FF
  • Coaxial surge protector
  • Multiples connectors
  • Low insertion loss
  • Easy installation
Contact Us
CNP surge protectors are designed to protect sensitive equipment, connected to coaxial lines as computer networks, video-transmission, against transient surge voltages and disturbances created by lightning.
Select another reference:
Network
 coaxial DC-100 MHz
Nominal line voltage
 Un 5 V
Max. DC operating voltage
 Uc 10 Vdc
Max. frequency
 f max. DC-100 MHz
Insertion loss
 ≤ 0.5 dB
Return loss
 ≥20 dB
Impedance
 50/75 ohms
VSWR
 < 1.3:1
Max. load current
@25°C
 IL 0.5 A
Operating current
Continious current at Uc
 Ic None
Max. discharge current
max. withstand @ 8/20 µs by pole
 Imax 20 kA
Protection mode(s)
 Common mode/Differential mode
Protection level
Following the test category C3 (IEC61643-21) - Line/Line
 Up 20 V
Protection level L/N
@ In (8/20µs)
 Up L/N 20 V
Protection level L/PE
@ In (8/20µs)
 Up L/PE 20 V
Impulse current
2 x 10/350µs Test - D1 Category
 Iimp 2.5 kA
Nominal discharge current
C2 Category
 In 5 kA
Max Power
 4 W
DC Pass
 No
Technology
 GDT+Clamping diode
Connection to Network
 Connector F Female/Female
Format
 Insulating box
Mounting
 On plate
Housing material
 Metal+plastic
Operating temperature
 Tu -40/+85°C
Protection rating
 IP20
Outdoor application
 No
Failsafe mode
 Short-circuit - transmision cut-off - fault mode 2
Disconnection indicator
 Transmission interrupt
Dimensions
 See diagram
Standards compliance
 IEC 61643-21 / EN 61643-21 / UL497E