19'' patch panel surge protector for high speed network STP
PL12-CAT6
Part Number: 581534
- Surge protector for CAT6
- 12 ports
- 19'' patch panel 1 U
- 100/1000/10Gigabit Ethernet network compliance
- Connectors RJ45 shielded
- Bi-directionnel
The PLx-CAT6 are surge protection devices in 19" format and offer protection against lightning and surge voltages for sensitive interfaces connected in a Gigabit Ethernet network. The protection circuit consists of a highly efficient combination of 3-pole gas arresters and low-capacitance diodes. The protection components are connected via standard RJ45 plugs. Up to 24 ports can be protected with the PL24-CAT6. The 19'' format allows easy installation in all standard 19'' cabinets.
Network | 10 Gigabit Ethernet, Cat.6 cabling | |
Nominal line voltage | Un | 5 Vdc |
Max. DC operating voltage | Uc | 8 Vdc |
Max. frequency | f max. | 250 MHz |
Max. data rate | 1000 Mbps | |
Insertion loss | < 1 dB | |
Max. load current | IL | 1000 mA |
Protection level | Up | 20 V |
Max. capacitance | C | < 25 pF |
Impulse current | Iimp | 500 A |
Line/Line Nominal discharge current | In L/L | 500 A |
Line/Ground Nominal discharge current | In L/PE | 2000 A |
Technology | GDT+clamping diode | |
SPD configuration | 12 ports de 8 wires | |
Connection to Network | RJ45 shielded female input/output | |
Format | Rack 19'' | |
Mounting | Baie 19'' | |
Housing material | Aluminium | |
Operating temperature | Tu | -40/+85°C |
Protection rating | IP20 | |
Failsafe mode | Short-circuit | |
Disconnection indicator | Transmission interrupt | |
Spare module(s) | 12-port PCB | |
Remote signaling of disconnection | No | |
Pinout | (1-2)(3-6)(4-5)(7-8) | |
Dimensions | See diagram |
Standards compliance | IEC 61643-21 / EN 61643-21 / UL497 B / IEEE 802-3an |