Contact : +33 1 41 23 50 35 (9:00 – 17:00 CEST)

DC power surge protector - 350 Vdc

DS240-350DC
Part Number: 310901
DS240-350DC
  • DC or PV power surge protector
  • 350 Vdc
  • Compact design
  • Imax: 40 kA
  • Pluggable module
  • Remote signaling (option)
  • Very low Up protection level

DS210-DC surge protectors are designed to protect equipment connected to DC (and AC) power supplies from lightning surges. It is based on varistors matched to the network voltage: the varistors have thermal disconnection devices to control any end-of-life. These SPD are DIN rail compatible and is connected in parallel on the line to be protected.

Select another reference:

SPD type
2
Network
DC or PV network 350Vdc
Nominal DC voltage
Un-dc 350 Vdc
Nominal PV voltage
Uocstc 350 Vdc
Max. AC operating voltage
Uc 350 Vac
Max. PV operating voltage
Ucpv 460 Vdc
Max. DC operating voltage
Uc 460 Vdc
Max. load current
IL 20 A
Residual Current
Leakage current to Ground
Ipe < 0.1 mA
Operating current
Continious current at Uc
Ic < 0.1 mA
PV Permanent Operating current
Current consumption at Ucpv
Icpv < 0.1 mA
Follow current
If None
Nominal discharge current
15 x 8/20 µs impulses
In 20 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
Imax 40 kA
Total Maximum discharge current
max. total withstand @ 8/20 µs
Imax Total 80 kA
Current withstand short circuit PV
Iscpv 1000 A
Connection mode(s)
+/-/PE
Protection mode(s)
Common mode/Differential mode
Protection level +/PE (-/PE)
@ In (8/20µs)
Up 1400 V
Technology
MOV
SPD configuration
2-poles
Connection to Network
By screw terminals: 1.5-10mm² (actives wires) and 2.5-25mm² (ground)
Format
Plug-in modular box
Mounting
Symmetrical rail 35 mm (EN 60715)
Housing material
Thermoplastic UL94 V-0
Operating temperature
Tu -40/+85°C
Protection rating
IP20
Outdoor application
No
Failsafe mode
Disconnection from DC network
Disconnection indicator
2 mechanical indicators
Spare module(s)
DSM240-350DC
Remote signaling of disconnection
Option DS240S-350DC : output on changeover contact
Dimensions
See diagram
Weight
0.14 kg
Standards compliance
IEC 61643-11 / EN 61643-11 / UL1449 ed.5
Certification
UL Recognized
Thermal disconnector
Internal
Fuses
Fuses type gG - 20A