Contact : +33 1 41 23 50 23 (9:00 – 17:00 CEST)

1-pole Type 1 and Type 2 SPD for 48 Vdc

DDC30S-10-65
Part Number 828110121
DDC30S-10-65
  • Combined SPD for DC supplies, 1-pole
  • Type 1 + 2
  • In: 15 kA / Imax: 30 kA
  • Iimp: 4kA
  • Pluggable module
  • Remote signaling
  • prIEC 61643-41 compliance
Contact Us
The DDC range is Type 1 + 2 pluggable surge protectors designed for equipment connected to DC powerlines. The technology based on high energy varistor equipped with thermal disconnection mechanism offers protection efficiency and and a maximal reliability.
SPD type
1+2
Nominal DC voltage
 Un-dc 48 Vdc
Max. AC operating voltage
Uc 50 Vac
Max. DC operating voltage
 Uc 65 Vdc
Residual Current
Leakage current to Ground
 Ipe < 0.1 mA
Follow current
If None
Nominal discharge current
15 x 8/20 µs impulses
 In 15 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
 Imax 30 kA
Impulse current by pole
max. withstand 10/350µs by pole
 Iimp 4 kA
Connection mode(s)
 +/PE or -/PE
Protection level +/PE (-/PE)
@ In (8/20µs)
 Up 300 V / -
Admissible short-circuit current
 Isccr 50 000 A
Network type
 DC
Technology
 MOV
SPD configuration
 Single phase
Connection to Network
 Srew terminals: 2.5-25mm² +/-: 1.5-10mm²
Plugable
 Yes
Mounting
 Symmetrical rail 35 mm (EN 60715)
Housing material
 Thermoplastic UL94 V-0
Operating temperature
 Tu -40/+85°C
Protection rating
 IP20
Outdoor application
 No
Failsafe mode
 Disconnection from DC network
Disconnection indicator
 1 mechanical indicator - Red/Green
Spare module(s)
 MDDC30-65
Remote signaling of disconnection
 Output on changeover contact
Dimensions
 See diagram - 1TE (EN43880)
Weight
 0.096 kg
Standards compliance
 prIEC 61643-41
Thermal disconnector
 Internal
Back-up protection device
50 A min. - 125 A max. - Fuses Type gG