Type 1+2 AC surge protector - 1-pole
DAC1-13-10-320
DAC1-13-10-320
Part Number: 821710311
  • Type 1 + 2 AC surge protector
  • In : 20 kA
  • Iimp : 12,5 kA
  • Pluggable module for each phase
  • Remote signaling (option)
  • EN 61643-11, IEC 61643-11 compliance
Installation Sheet

The DAC1-13 is an extreme duty Type 1+2 pluggable SPD designed to protect AC powerline at the main switchboard of an installation equipped with lightning rod.

The technology ‘Multi-varistor” allows a very high discharge current capability in small dimensions and the best possible behavior to the AC network (no follow current).

Despite their high discharge capability, the DAC1-13 surge protectors are especially compact and are available in multipolar versions to protect single or 3-phase AC networks.



SPD type
following IEC test
1+2
Max. AC operating voltage L-N 320 Vac
Temporary Over Voltage (TOV) Charasteristics - 5 sec.
without disconnection
335 Vac withstand
Temporary Over Voltage (TOV) Charasteristics - 120 mn
without disconnection or with safety disconnection
440 Vac disconnection
Residual Current
Leakage current to Ground
< 1 mA
Follow current
None
Nominal discharge current
15 x 8/20 µs impulses
20 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
50 kA
Impulse current by pole
max. withstand 10/350µs by pole
12.5 kA
Withstand on overvoltages IEEE C62.41.1 20 kV
Admissible short-circuit current 50000 A
Protection level
@ In (8/20µs)
1.6 kV
Specific energy by pole
max. withstand 10/350 µs
40 kJ/ohm
 
Technology MOV
SPD configuration 1-pole
Connection to Network by screw terminals: 2.5-25 mm²
Format Plug-in modular box
Mounting Symmetrical rail 35 mm (EN60715)
Housing material Thermoplastic UL94-V0
Operating temperature -40/+85°C
Protection rating IP20
Failsafe behavior Disconnection
Disconnection indicator 1 mechanical indicator
Spare module(s)
MDAC1-13-320
Remote signaling of disconnection option DAC1-13S-10-320: output on changeover contact
Dimensions
See diagram
Standards compliance IEC 61643-11 / EN 61643-11 / UL1449 4ed.
Certification -
Fuses
Fuses Type gG - 125 A
Thermal disconnector Internal
Installation ground fault breaker Type 'S' or delayed