Contact : +33 1 41 23 50 30 (9:00 – 17:00 CEST)

1-pair '5pins' plug-in surge protector

DP80-TW
Part Number 85126
DP80-TW
  • Surge protector '5-pin' configuration
  • 1-pair
  • Fast installation with no wiring modification
  • Fast maintenance
  • For analog or high speed telecom lines
Contact Us
The DP80-TW is designed to protect large telephone equipment (PBXs, central offices) against lightning surges. This protection is based in hybrid protection diagram and in K20 configuration. The DP80-TW is a one-pair plug-in module that uses the 5-pin configuration, and so can be adapted to CITEL TC99 and similar 100-pair connector block.
Select another reference:
Network
 RTC, ADSL
Nominal line voltage
 Un 150 V
Max. DC operating voltage
 Uc 170 Vdc
Max. frequency
 f max. > 10 MHz
Insertion loss
 < 1 dB
Max. load current
@25°C
 IL 100 mA
Nominal discharge current
15 x 8/20 µs impulses
 In 5 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
 Imax 10 kA
Protection mode(s)
 Common/Differential mode
Protection level
@ In (8/20µs)
 Up 700 V
Protection level
Following the test category C3 (IEC61643-21) - Line/Line
 Up 700 V
Max. capacitance
 C < 70 pF
Nominal discharge current
C2 Category
 In 5 kA
Line/Line Nominal discharge current
C2 Category
In L/L 5 kA
Nominal Discharge Current, X-C (Line/Earth)
8/20µs Test x 10 - C2 Category
 In L/PE 5 kA
Technology
 GDT+CTP
SPD configuration
 1 pair
Connection to Network
 '5-pin' plug-in
Format
 1-pair plug-in box
Mounting
 On '5-pin' connector block
Housing material
 Thermoplastic UL94 V-0
Operating temperature
 Tu -40/+85°C
Protection rating
 IP20
Outdoor application
 No
Failsafe mode
 Short-circuit
Disconnection indicator
 Transmission interrupt
Remote signaling of disconnection
 No
Dimensions
 See diagram
Standards compliance
 IEC 61643-21 / EN 61643-21