Contact : +33 1 41 23 50 23 (9:00 – 17:00 CEST)

Type 1+2 PV surge protector - 600 Vdc

DS50PVS-600G/12KT1
Part Number 482443
DS50PVS-600G/12KT1
  • Type 1+2 surge protector for Photovoltaic
  • Impulse currents Iimp/Itotal : 6.25/12.5 kA (10/350µs)
  • Common/Differential mode protection
  • Remote signaling
  • IEC 61643-31, EN 61643-31, EN 50539-11 and UL1449 ed.5 compliance
Contact Us
Type 1 + 2 surge protection (SPD) DS50PV/12KT1 are intended for the protection of photovoltaic power grids. The SPD cartridges are pluggable to ensure quick replacement in the event of a defect. The protection circuit consists of a fault-resistant Y-circuit with a gas discharge tube and high-power varistors. The products are available with a remote signaling system of the state of the surge protectior.
SPD type
IEC

1+2
Network

PV 500 Vdc
Nominal PV voltage
 Uocstc

600 Vdc
Max. PV operating voltage
 Ucpv

720 Vdc
Residual Current
Leakage current to Ground
 Ipe

None
PV Permanent Operating current
Current consumption at Ucpv
 Icpv

< 0.1 mA
Follow current
If

None
Nominal discharge current
15 x 8/20 µs impulses
 In

15 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
 Imax

40 kA
Total Maximum discharge current
max. total withstand @ 8/20 µs
Imax Total

60 kA
Impulse current by pole
max. withstand 10/350µs by pole
 Iimp

6.25 kA
Total lightning current
max. total withstand @ 10/350µs
 Itotal

12.5 kA
Current withstand short circuit PV
 Iscpv

15 000 A
Connection mode(s)

+/-/PE
Protection mode(s)

Common/Differential mode
Protection level +/-
@ In (8/20µs)
 Up

3.6 kV
Protection level +/PE (-/PE)
@ In (8/20µs)
 Up

2.9 kV
Technology

MOV+GDT
Connection to Network

By screw terminals: 2.5-25mm²
Format

Plug-in modular box
Plugable

Yes
Mounting

Symmetrical rail 35 mm (EN 60715)
Housing material

Thermoplastic UL94 V-2
Operating temperature
 Tu

-40/+85°C
Protection rating

IP20
Outdoor application

No
Disconnection indicator

2 mechanical indicators
Spare module(s)

DSM50PVS-600G/12KT1 + DSM50PVS-600GPE/12KT1
Remote signaling of disconnection

Output on changeover contact
Dimensions

See diagram
Weight

0.328 kg
Standards compliance

IEC 61643-31 / EN 61643-31 / EN 50539-11 / UL1449 ed.5
Thermal disconnector

Internal
Back-up protection device

Without