Contact : +33 1 41 23 50 23 (9:00 – 17:00 CEST)

AC surge protector for LED Lighting system Class 1

MLPC1-230L-V/2L
Part Number 831225
MLPC1-230L-V/2L
  • Type 2 (or 3) surge protector for Class I LED Lighting
  • AC surge protection for 2-Phase + Neutral network
  • Compact dimensions
  • Screw connection
  • Max. discharge current 10 kA
  • Certified IEC 61643-11
Contact Us
The MLPC range is a comprehensive series of AC surge protectors dedicated to LED lighting system. The MLPC are very compact to be integrated into luminaires and are available 2 modes of connection (screw terminal or spring).
SPD type
2 (or 3)
Isolation classe
 I
Network
 2-phase + N 230 V
AC system
 TT-TN
Max. AC operating voltage
Uc 320 Vac
Max. load current
@25°C
 IL 5 A
Temporary Over Voltage (TOV) Characteristics - 5 sec.
Without disconnection
 UT 335 Vac withstand
Temporary Over Voltage (TOV) Characteristics - 120 mn
Without disconnection or with safety disconnection
 UT 440 Vac disconnection
Residual Current
Leakage current to Ground
 Ipe None
Nominal discharge current
15 x 8/20 µs impulses
 In 5 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
 Imax 10 kA
Withstand on Combination waveform IEC 61643-11
Class III test: 1.2/50µs - 8/20µs
 Uoc 10 kV / 5 kA
Protection mode(s)
 L1/N, L2/N and N/PE
Protection level L/N
@ In (8/20µs)
 Up L/N 1.5 kV
Protection level N/PE
@ In (8/20µs)
 Up N/PE 1.5 kV
Admissible short-circuit current
 Isccr 10 000 A
Connection to Network
 By screw terminal: 1.5mm² max.
Mounting
 On plate
Housing material
 Thermoplastic UL94 V-0
Operating temperature
 Tu -40/+85°C
Protection rating
 IP20
Failsafe mode
 Disconnection, Green Led OFF and power cut off
Disconnection indicator
 LED green OFF and AC network cut-off
Voltage/operating indicator
 Green Led ON
Dimensions
 See diagram
Weight
 0.057 kg
Standards compliance
 IEC 61643-11 / EN 61643-11
Certification
 KEMA
Thermal disconnector
 Internal