RJ45 surge protector for CAT6A cabling network
MJ8-C6A
Part Number: 581540
- up to 10-Gigabit Ethernet compatible
- Category 6A compatible
- RJ45 Shielded connectors
- Mounted on frame or DIN rail
- IEC 61643-21, EN 61643-21 and UL497B compliance
Datasheet
The MJ8-C6A surge protector is designed to protect data processing equipment, connected to twisted pair Ethernet 10 to 1000 Mbit/s network
Featured with in/out RJ45 connectors.
| Network | 10Gigabit Ethernet - Cat 6A cabling specification | |
| Nominal line voltage | Un | 5 Vdc |
| Max. DC operating voltage | Uc | 8 Vdc |
| Max. frequency | f max. | > 250 MHz |
| Max. data rate | 10 Gbps | |
| Insertion loss | < 1 dB | |
| Max. load current | IL | 1000 mA |
| Protection level | Up | 20 V |
| Max. capacitance | C | < 25 pF |
| Impulse current | Iimp | 500 A |
| Line/Line Nominal discharge current | In L/L | 500 A |
| Line/Ground Nominal discharge current | In L/PE | 2000 A |
| Technology | GDT + Clamping diode | |
| SPD configuration | 4 pairs + shielded | |
| Connection to Network | RJ45 shielded connectors female input/output | |
| Format | Connector RJ45 | |
| Mounting | Mounting flange,Screw lug, DIN Rail | |
| Housing material | Aluminium | |
| Operating temperature | Tu | -40/+85°C |
| Protection rating | IP20 | |
| Failsafe mode | Short-circuit | |
| Disconnection indicator | Transmission interrupt - default mode 2 | |
| Pin outs | (1-2)(3-6)(4-5)(7-8) | |
| Dimensions | See diagram | |
| Weight | 0.114 kg |
| Standards compliance | IEC 61643-21/ EN 61643-21 / UL497B IEEE 802-3af/3at/3bt/ ANSI/TIA-568-C.1 |
