DC power surge protector - 75 Vdc
DS210-75DC
DS210-75DC
Part Number: 440601
  • Surge protector for DC supplies
  • 75 Vdc
  • Imax: 6 kA
  • Pluggable module
  • Operating indicator
  • IEC 61643-11, EN 61643-11 and UL1449 ed.4
Installation Sheet
Contact Us

DS210-DC surge protectors are designed to protect equipment connected to DC (and AC) power supplies from lightning surges. It is based on varistors matched to the network voltage: the varistors have thermal disconnection devices to control any end-of-life. These SPD are DIN rail compatible and is connected in parallel on the line to be protected.

SPD type
following IEC test		 2 (ou 3)
Network
 DC network 75Vdc
Nominal DC voltage
 75 Vdc
Max. AC operating voltage L-N
 60 Vac
Max. DC operating voltage
 85 Vdc
Max. load current
 20 A
Residual Current
Leakage current to Ground		 < 0.1 mA
Operating current
Continious current at Uc		 < 0.1 mA
PV Permanent Operating current
Current consumption at Ucpv		 < 0.1 mA
Follow current
None
Nominal discharge current
15 x 8/20 µs impulses		 2 kA
Max. discharge current
max. withstand @ 8/20 µs by pole		 6 kA
Total Maximal discharge current
max. total withstand @ 8/20 µs 		6 kA
Current withstand short circuit PV
 1000 A
Connection mode(s)
 +/-/PE
Protection mode(s)
 Common/Differential mode
Protection level
@ In (8/20µs)		 250 V
Technology MOV
SPD configuration 2 poles
Connection to Network By screw terminals: 1.5-10mm² (actives wires) and 2.5-25mm² (ground)
Format
 Plug-in modular box
Mounting
 Symmetrical rail 35 mm (EN60715)
Housing material Thermoplastic UL94-V0
Operating temperature -40/+85°C
Protection rating IP20
Outdoor application
 False
Failsafe behavior disconnection from DC line
Disconnection indicator Green led off
Spare module(s)
 DSM210-75DC
Dimensions
 See diagram
Standards compliance
 IEC 61643-11 / EN 61643-11 / UL1449 4ed.
Fuses
 Fuses type gG- 10 A
Thermal disconnector internal