Contact : +33 1 41 23 50 23 (9:00 – 17:00 CEST)

Ultra Compact Type 3 hard wired surge protector

MSB6-400/LD
Part Number 561312
MSB6-400/LD
Availability:
€26.00 (excl. tax)
Add to cart

Available within 3 weeks

  • Ultra compact Type 3 surge protector
  • LED indicator
  • IP20
  • EN 61643-11, IEC 61643-11, UL1449 ed.5 compliance
Contact Us
MSB6 surge protectors Type 3 are designed for effective protection of sensitive equipment, in addition to the surge protector installation (coordination surge protector). These surge protectors utilize a ultra compact and economica scheme based varistors, to obtain a power flow relevant for secondary protection. The operating condition of the arrester is signaled by buzzer.
Select another reference:
SPD type
IEC 3
Network
 230 V single-phase
AC system
 TT-TN
Nominal line voltage
 Un 230 V
Max. AC operating voltage
Uc 255 Vac
Temporary Over Voltage (TOV) Characteristics - 5 sec.
Without disconnection
 UT 335 Vac withstand
Temporary Over Voltage (TOV) Characteristics - 120 mn
Without disconnection or with safety disconnection
 UT 440 Vac disconnection
Operating current
Continious current at Uc
 Ic None
Follow current
If None
Nominal discharge current
15 x 8/20 µs impulses
 In 3 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
 Imax 6 kA
Withstand on Combination waveform IEC 61643-11
Class III test: 1.2/50µs - 8/20µs
 Uoc 6 kV
Withstand on overvoltages IEEE C62.41.1
 6 kV/6 kA
Protection mode(s)
 Common/Differential mode
Protection level L/N
@ In (8/20µs)
 Up L/N 1.5 kV
Protection level L/PE
@ In (8/20µs)
 Up L/PE 1.5 kV
Admissible short-circuit current
 Isccr 3 000 A
Technology
 MOV+GDT
Connection to Network
 Wires
Compact
 Yes
Mounting
 AC outlet or screw terminal
Housing material
 Thermoplastic UL94 V-0
Operating temperature
 Tu -40/+85°C
Protection rating
 IP20
Failsafe mode
 Disconnection from AC network
Disconnection indicator
 Green LED OFF
Voltage/operating indicator
 Green Led ON
Dimensions
 See diagram
Weight
 0.02 kg
Standards compliance
 IEC 61643-11 / EN 61643-11 / UL1449 ed.5
Certification
Thermal disconnector
 Internal
Installation ground fault breaker
 Type 'S' or delayed