Contact : +33 1 41 23 50 23 (9:00 – 17:00 CEST)
Product Selection CMJ8-POE-A-PCB
CMJ8-POE-A-C5E

The CMJ8-POE is an outdoor PoE surge protector designed to protect sensitive data-processing equipment connected to a PoE (Power over Ethernet) network from transient over voltages. The CMJ8-POE surge protector is deployed in signal network applications with data transmission speeds up to1000 Mbps and is equipped with high quality shielded RJ45 connectors.
- Discover our latest innovation : the CWMJ8-POE-C6A - POE ++ compatible surge protector - Category 5E compatible - Shielded RJ45 connectors - Outdoor application: IP65 - Metal enclosure - Compliant with IEC 61643-21, NF EN 61643-21 - UL497B certified
Outdoor gigabit POE-A surge protector
POE surge protector
CMJ8-POE-A-C5E
CMJ8 Series Outdoor Gigabit POE SPD IEEE 802.3af 802.3at, 802.3btUp to 10Gbps
CMJ8-POE-A-C5E/PCB

CMJ8-POE-B-C5E

The CMJ8-POE is an outdoor PoE surge protector designed to protect sensitive data-processing equipment connected to a PoE (Power over Ethernet) network from transient over voltages. The CMJ8-POE surge protector is deployed in signal network applications with data transmission speeds up to1000 Mbps and is equipped with high quality shielded RJ45 connectors.
- Discover our latest innovation : the CWMJ8-POE-C6A - POE ++ compatible surge protector - Category 5E compatible - Shielded RJ45 connectors - Outdoor application: IP67 - Metal enclosure - Compliant with IEC 61643-21, NF EN 61643-21 - UL497B certified
Outdoor gigabit POE-B surge protector
POE surge protector
POE-B and Gigabit Ethernet, High POE
CMJ8-POE-B-C5E
CMJ8 Series Outdoor Gigabit POE SPD IEEE 802.3af 802.3at, 802.3btUp to 10Gbps
CMJ8-POE-A-C5E/PCB

CGMJ8-POE-B-C5

The CMJ8-POE is an outdoor PoE surge protector designed to protect sensitive data-processing equipment connected to a PoE (Power over Ethernet) network from transient over voltages. The CMJ8-POE surge protector is deployed in signal network applications with data transmission speeds up to1000 Mbps and is equipped with high quality shielded RJ45 connectors.
- Discover our latest innovation : the CWMJ8-POE-C6A
Outdoor gigabit POE-B surge protector
POE surge protector
POE-B and 100Mbit Ethernet, High POE
CGMJ8-POE-B-C5
CMJ8 Series Outdoor Gigabit POE SPD IEEE 802.3af 802.3at, 802.3btUp to 10Gbps
CMJ8-POE-A-C5E/PCB

CRMJ8-POE-C6A

The CxMJ8-POE-C6A is an outdoor PoE surge protector designed to protect sensitive data-processing equipment connected to a PoE (Power over Ethernet) network cabling Category 6 and Ethernet 10Gigabit from transient overvoltages. ... The CMJ8-POE surge protector is deployed in signal network applications with data transmission speeds up to1000 Mbps and is equipped with high quality shielded RJ45 connectors.
- POE ++ compatible surge protector - Category 6A compatible - Shielded RJ45 connectors - Outdoor application: IP67 - Metal case - Compliant with IEC 61643-21, NF EN 61643-21 - UL497B certified
Outdoor POE++ in-line surge protector
POE surge protector
POE ++ and 10Gigabit Ethernet
CRMJ8-POE-C6A
CMJ8 Series Outdoor Gigabit POE SPD IEEE 802.3af 802.3at, 802.3btUp to 10Gbps
CRJ8-POE-C6A/PCB
CWMJ8-POE-C6A

The new CWMJ8-POE-C6A product is designed to protect POE ++ and Ethernet Category 6A networks. ... It completes the existing range of CITEL PoE surge protectors (CRMJ8-POE-C6A with metal enclosure, for outdoor application & MJ8-POE-C6A for indoor use). Based on hybrid diagram made with gas tubes and low capacitance clamping diodes, this surge protector is ideally suited for PoE-connected devices as IP cameras or WiFi hotspots.
- POE++ Compatible (IEEE 802.3bt) -10Gb (5-100m) with Cat6A S/FTP cabling - Shielded RJ45 connectors - Outdoor applications, IP66 (NEMA 4/4X) - Plastic enclosure, UL94-V0 - Conforms to IEC/EN 61643-21 - SPD categories D1, C3, C2, C1
10 gigabit POE ++ surge protector
POE surge protector
CWMJ8-POE-C6A
CMJ8 Series Outdoor Gigabit POE SPD IEEE 802.3af 802.3at, 802.3btUp to 10Gbps
PCH24-POE-A

- 19'' patch panel surge protector for POE-A - 24 ports - In : connector type 110 back - Out : RJ45 front - Maintenance possible per port - Secondary protection - UL497B
19'' patch panel surge protector - POE-A line
POE mode A, Gigabit Ethernet, POE Plus
PCH24-POE-A
MJ8-POE-A

The MJ8-POE is designed to protect sensitive data-processing equipment connected to a POE++ (Power over Ethernet) network from transient overvoltages. The MJ8-POE surge protector is deployed in signal network applications with data transmission speeds of 100 and 1000 Mbps.
- POE++ Compatible (IEEE 802.3bt) - 1Gb (5-100m) with Cat6A S/FTP cabling - Shielded RJ45 connectors - Indoor applications, IP20 (NEMA 2) - Metallic enclosure - Conforms to IEC/EN 61643-21 - SPD categories D1, C3, C2, C1
Surge protector for POE ++ and Category 6A cabling network
POE surge protector
MJ8-POE-A
MJ8-POE
MJ8-POE Series for IEEE 802.3af, 802.3at, 802.3btUL497BCAT6A,CAT6, CAT5e, CAT5

PCH48-POE-A

- 19'' patch panel surge protector for POE-A - 48 ports - In : connector type 110 back - Out : RJ45 front - Maintenance possible per port - Secondary protection - UL497B
19'' patch panel surge protector - POE-A line
POE mode A, Gigabit Ethernet, POE Plus
PCH48-POE-A
RAK16-POE-A

The RAK series of rack mount and wall mount standoff protectors will ensure the reliable operation of networked equipment connected to 10/100/1000BaseT Ethernet, Cat5, Cat6, PoE and most other communication interfaces.
- 19'' patch panel surge protector for POE-A - mounting 'stand-alone' - 16 ports - In/Out front : RJ45 -Maintenance possible per port - Secondary Protection - Conforme UL497B
POE mode A, Gigabit Ethernet, POE Plus
RAK16-POE-A
PCH12-POE-A

- 19'' patch panel surge protector for POE-A - 12 ports - In : connector type 110 back - Out : RJ45 front - Maintenance possible per port - Secondary protection - UL497B
19'' patch panel surge protector - POE-A line
POE mode A, Gigabit Ethernet, POE Plus
PCH12-POE-A
RAK32-POE-A-SO

The RAK series of rack mount and wall mount standoff protectors will ensure the reliable operation of networked equipment connected to 10/100/1000BaseT Ethernet, Cat5, Cat6, PoE and most other communication interfaces.
- 19'' patch panel surge protector for POE-A - mounting 'stand-alone' - 32 ports - In/Out front : RJ45 -Maintenance possible per port - Secondary Protection - Conforme UL497B
POE mode A, Gigabit Ethernet, POE Plus
RAK32-POE-A-SO
MJ8-POE-A/SD

MJ8-POE-A/SD is designed with more stronger mounting DIN-Rail bracket for fitting vibration environment like wind turbines. This product protect sensitive data-processing equipment connected to a POE++ (Power over Ethernet) network from transient overvoltages, is deployed in signal network applications with data transmission speeds of 100 and 1000 Mbps.
- POE++ compatible - Strong mounting for DIN-rail for vibration enviroments - Gigabit Ethernet (Cat.5E) - Shielded enclosure and connectors - 2 kA discharge capability - IEC 61643-21, EN 61643-21 compliance
RJ45 surge protector for POE++
MJ8-POE-A/SD
MJ8-POE-A/SD
MJ8-POE-A/SD Series POE++ Surge protector Gigabit Ethernet (Cat.5E)

MSP-VM12/R

MSP-VM-R Series POE Injector or Splitter 24Vdc to 48Vdc Non-POE + POE networks
POE Network
MSP-VM230/R

MSP-VM-R Series POE Injector or Splitter 24Vdc to 48Vdc Non-POE + POE networks
POE Network
MSP-VM24/R

MSP-VM-R Series POE Injector or Splitter 24Vdc to 48Vdc Non-POE + POE networks
POE Network
MSP-VM120/R

MSP-VM-R Series POE Injector or Splitter 24Vdc to 48Vdc Non-POE + POE networks
POE Network
MSP-VM48-RINJ

- Security camera surge protector - Combined POE Mid-Span Injector or Splitter and SPD - Supports 802.3af, 802.3at, 802.3bt (POE++) - Compact aluminum housing - DIN Rail mounting or plate - Integrated power supply injector connector (power supply separate)
MSP-VM-R Series POE Injector or Splitter 24Vdc to 48Vdc Non-POE + POE networks
POE Network
MJ8-POE-B

The MJ8-POE is designed to protect sensitive data-processing equipment connected to a POE (Power over Ethernet) network from transient overvoltages. The MJ8-POE surge protector is deployed in signal network applications with data transmission speeds of 100 and 1000 Mbps.
- POE++ compatible (IEEE 802.3bt) - 10G compatible from 5m to 100m in the channel, using Cat-6A S/FTP cabling - RJ45 Shielded connectors - IEC 61643-21, EN 61643-21 - Indoor application: IP20 rating (NEMA 2) - Plastic enclosure, UL94-V0 - Location and test categories: D1, C2, C3
Surge protector for POE ++ and Category 6A cabling network
POE surge protector
POE-B and Gigabit Ethernet, High POE
MJ8-POE-B
MJ8-POE
MJ8-POE Series for IEEE 802.3af, 802.3at, 802.3btUL497BCAT6A,CAT6, CAT5e, CAT5

Range Selection CMJ8-POE-A-PCB
Range MJ8-POE-A/SD - MJ8-POE-A/SD

Range MJ8-POE - MJ8-POE-A

Range DAC40C Single Phase - DAC40C-11-150

Range DAC15CS Single Phase - DAC15CS-11-150

Range DAC15C Single Phase - DAC15C-11-150

Range DAC40C 3-Phase - DAC40C-30-150

Range DAC40CS 3-Phase - DAC40CS-30-150

Range DAC15C 3-Phase - DAC15C-30-150

Range DAC15CS 3-Phase - DAC15CS-30-150

Range DAC40CS Single Phase - DAC40CS-11-150

Range Cartouches de remplacement BT - DSM10-400

Range Cartouches de remplacement PV - DSM50PV-1000G/51

Range ZPAC1 - ZPAC1-13VG-31-275

Range PAC - PAC25S-10-150

Range MLPCA - MLPCA1-230L

Range DACN10-L - DACN10-L11-150

Range DLAS - DLAS-06D3/R

Range DLAH - DLAH-06D3

Pages CMJ8-POE-A-PCB
CITEL, surge protectors for security systems
. Selection of SPDs for Security Systems 1 - Surge Protectors for Survey Cameras | Location | Citel model | Type of SPDs | | | -------------------------------- | ----------------- | ----------------------------------- | ---- | | Anolog Camera | MSP-VM230-2P | Combined surge protectors | | | IP Cameras | CRMJ8-POE-C6A | POE++ and 10 Gigabit Ethernet | | | Coaxial lines as Video-transmission | CXC06-B/FM | Coaxial surge protector, BNC connector | | | 10Gigabit Ethernet/POE++ networks | MJ8-POE-C6A | Ethernet surge protector, Shielded RJ45 connections on Cat6A cabling | | | 10Gigabit Ethernet | MJ8-C6A | Ethernet surge protector, Shielded RJ45 connections on Cat6A cabling | |
2 - Surge Protectors for Control Rooms | Location | Citel model | Type of SPDs | | | -------------------------------- | ----------------- | ----------------------------------- | ---- | | Control room | RAK16-E-C6 | 19" Rack surge protector - 10/100/1000BaseT networks | |
3 - Surge Protectors for Main Electrical Panel | Location | Citel models | Type of SPDs | | | -------------------------------- | ----------------- | ----------------------------------- | ---- | | AC network - Main switchboard | DAC1-13S-31-275 | Type 1+2+3 surge protector 3-phase+N | |
4 - Surge Protectors for fire Alarm | Location | Citel model | Type of SPDs | | | -------------------------------- | ----------------- | ----------------------------------- | ---- | | Fire alarm | DAC40CS-11-275 | Type 2 (or 3) surge protector - Compact - Single phase | | | Fire alarm | DAC40CS-31-275 | Type 2 (or 3) surge protector - Compact - 3-phase | |
5 - Surge Protector for Acces Control | Location | Citel model | Type of SPDs | | | -------------------------------- | ----------------- | ----------------------------------- | ---- | | Access control | DLA | Dataline surge protectors - DIN rail mounting | |
6 - Surge Protector for LED Lighting | Location | Citel model | Type of SPDs | | | -------------------------------- | ----------------- | ----------------------------------- | ---- | | Inside the cutouts of led lighting pole | DLPM1-230L | 230 V single phase surge protector - DIN rail mounting | |

| --- | --- | |
Download flyer
|
Watch video
| | | |
Technical note: PPV-PAC series
One solution for this is the use of lightning and surge arresters that can be soldered directly to a printed circuit board (PCB). In contrast to conventional devices which are mounted on a DIN rails, this means that only a fraction of the space is required. ... The single-pole protective devices are soldered onto PCBs, which means that any configuration (Y circuit, L circuit, delta circuit, etc.) can be realised. ... Furthermore, all units of the PPV and PAC series have the same PinOut, which makes it easy to change from type 1 to type 2 or vice versa, as well as to change to a different voltage without adapting the PCB Key points - PV and AC versions - Combination arrestor T1 + T2 or SPD T2 - Iimp up to 6.25 kA (10/350) - Imax up to 40 kA (8/20) - Optical failure signalling - Remote signalling as standard - Same pin-out for all variants - Rated voltages up to Un = 1,000 Application example See products | | Models | | --- | ---| | | PPV series | | | PAC series |
Citel, Water Waste Treatment

Implementation of coordinated system of protection against transient overvoltages |--- | --- | --- | --- | | Number | Location | Models | | 1 | AC power - Main electrical panel | DAC1-13VGS-31-275 | | | 1 | | DS254VG-300/G | | | 2 | Coaxial antenna - Radio wireless | P8AX | | | 3 | AC power - Distribution panel | DAC40CS-31-275 | | | 4 et 5 | Control circuit - Remote management | DAC15CS-31-275 | | 6 | Telecom-Data-Ethernet | DLA | | | 6 | | MJ8-POE-C6A | | | 7 | Control room | DAC50S-31-275 | | | 7 | | MJ8-POE-C6A | | | 7 | | DLA | | | --- | | Download flyer | | |
Surge Protection for Wind Turbine installation
. Selection of SPDs


1 - 230V / 400 V | | Description | Model | | --- | ---- | --- | | | Type 1+2+3 surge protector - VG Technology - Uc : 760V |DACN1-25CVGS-30-760 | | | 3-phase Type 2 surge protector - Uc : 760V |DAC50S-30-760 | | | 3-phase Type 2 surge protector - Uc : 800V |DAC50S-31-760-2600DC | 2 - 690 V | | Description | Model | | --- | ---- | --- | | | Type 2+3 surge protector - Uc : 1260V |DACN30VGS-30-1260 | | | Type 2 surge protector - Uc : 1100V |DS41S-1000 | 3 - Datalines | | Description | Model | | --- | ---- | --- | | | 1-pair Telecom-Data surge protector - DIN rail mounting - Ultra compact |DLC-24D3/RE | | | RJ45 surge protector for POE++ networks |MJ8-POE-A-SD | 4 - Counter | | Description | Model | | --- | ---- | --- | | | Lightning monitoring system for windturbines |LMS-W |
Download Windturbine flyer
Citel, SPDs for Energy Storage System ESS
. Surge Protectors selection


| Location | | Description | Model | | --- | --- | ---- | --- | | DC Battery protecgtion | | Kit ESS: 1500Vdc surge protector + Fusible |KIT ESS DDC50S-21Y-1500 | | Main Electrical Panel | | Type 1+2+3 AC surge protector 3-phase+N |DAC1-13VGS-31-275 | | Main Electrical Panel | | Fuse + Holders for 3-phase+N surge protector |SFD1-13S-31 | | Secondary panel | | Type 2 AC surge protector 3-phase+N |DACF25S-31-275 | | Control Sytems | | 1-pair Data surge protector pluggable |DLA-24D3 | | Control Systems | | POE++ and Cat.6A surge protector |MJ8-POE-C6A | | Connected PV site | | Type 2 PV surge protector 1500Vdc |DPVN40CVGS-21Y-1500 | | Windturbines | | Type 1+2+3 AC surge protector single-phase|DACN1-25VGS-10-440 |
| --- | |
Download flyer
| | |
Effects of lightning
Overvoltages have many types of effects on electronic equipment; in order of decreasing importance: Destruction - Voltage breakdown of semiconductor junctions - Destruction of bonding of components - Destruction of tracks of PCBs or contacts - Destruction of triacs/thyristors by dV/dt.
PDF Found CMJ8-POE-A-PCB
CMJ8-POE__E_F130401B.pdf

.: +33 1 41 23 50 23 • Fax: +33 1 41 23 50 09 • e-mail: contact@citel.fr • www.citel.fr DBCP LISTED CMJ8-POE-A CMJ8-POE-A/PCB 140 113 112 80 Ficha Técnica Características F130401B • Reservado el derecho modificaciones de este documento P : Descargador de gas tripolar DBC : 3-pole Diodo baja capacidad Línea Equipo Protección POE para uso exterior CMJ8-POE • Versión POE • Para uso en exterior • Cajas de plástico • IP65 y IP66 • Conectores RJ45 blindados • Capacidad de descarga : 2 kA • UL497B Referencias CITEL C*MJ8-POE-A-C5E C*MJ8-POE-B-C5E Designación Protección POE-A para uso exterior Protección POE-B para uso exterior Red POE-A y Gigabit Ethernet, high POE POE-B y Gigabit Ethernet, high POE Velocidad máx. 1000 Mbps 1000 Mbps Configuración protección 8 hilos + blindaje 8 hilos + blindaje Pin out (1-2)(3-6)(4-5)(7-8) (1-2)(3-6)(4-5)(7-8) Tensión nominal de línea Un 48 Vdc 5 Vdc/48 Vdc Tensión DC máx. de operación Uc 60 Vdc - 650 mA 7.5 Vdc (1.2.3.6) - 650 mA. 60 Vdc (4.5.7.8) - 650 mA Corriente máx. de línea IL 1200 mA 1200 mA Frecuencia máx. f max > 100 MHz > 100 MHz Perdida de inserción < 1 dB < 1 dB Corriente de descarga nominal Línea/Tierra Prueba 8/20µs x 10 - categoria C2 In 2000 A 2000 A Corriente de descarga nominal Línea/Línea Prueba 8/20µs x 10 - categoria C2 In 500 A 500 A Corriente de choque Prueba 10/350µs x 2 - categoria D1 Iimp 500 A 500 A Nivel de protección Up 70 V 20/70 V Final de vida Corto-circuito Corto-circuito Características mecánicas Módulo de repuesto CMJ8-POE-A-C5E/PCB CMJ8-POE-B-C5E/PCB Dimensiones ver esquema Formato Caja plástica con conectores entrada/salida Conexión a la red conector blindaje RJ45 hembra entrada/salida Indicador de desconexión interrupción de transmisión Montaje sobre pletina o poste Temperatura de operación -40/+85°C Uso exterior si Material de la caja Termoplástico UL94-V0 Conformidad con las normas IEC 61643-21 / EN 61643-21 / UL497B IEEE 802-3ab/3at Código Versión IP65 CMJ8-POE-A-C5E 892002 CMJ8-POE-B-C5E 892003 Versión IP66 (estanqueidad reforzada) CGMJ8-POE-A-C5E 892004 CGMJ8-POE-B-C5E 892005

CMJ8-POE__A_F100202G.pdf

.: +33 1 41 23 50 23 • Fax: +33 1 41 23 50 09 • e-mail: contact@citel.fr • www.citel.fr DBCP LISTED CMJ8-POE-A CMJ8-POE-A/PCB 140 113 112 80 Data Sheet Characteristics F100202G • Document could be modified without notice P : 3-electrode gas tube DBC : 3-pole Low capacitance diode Line Equipment Outdoor gigabit POE surge protector CMJ8-POE • POE compatible • Outdoor application • Plastic enclosures • IP65 and IP66 • Shielded RJ45 connectors • 2 kA discharge capability • UL497B CITEL Model C*MJ8-POE-A-C5E C*MJ8-POE-B-C5E Description Outdoor gigabit POE-A surge protector Outdoor gigabit POE-B surge protector Network POE-A and Gigabit Ethernet, high POE POE-B and Gigabit Ethernet, high POE Max. data rate 1000 Mbps 1000 Mbps SPD configuration 8 wires + shielded 8 wires + shielded Pin outs (1-2)(3-6)(4-5)(7-8) (1-2)(3-6)(4-5)(7-8) Nominal line voltage Un 48 Vdc 5 Vdc/48 Vdc Max. ... Load current IL 1200 mA 1200 mA Max. frequency f max > 100 MHz > 100 MHz Insertion loss < 1 dB < 1 dB Line/Ground Nominal discharge current 8/20µs Test x10 - C2 category In 2000 A 2000 A Nominal discharge current Line/Line 8/20µs Test x10 - C2 category In 500 A 500 A Impulse current - 2 x 10/350µs Test - D1 Category Iimp 500 A 500 A Protection level Up 70 V 20/70 V Failsafe behavior Short-circuit Short-circuit Mechnical characteristics Spare unit CMJ8-POE-A-C5E/PCB CMJ8-POE-B-C5E/PCB Dimensions see diagram Format Plastic Box with connectors input/output Connection to Network RJ45 shielded connectors female input/output Disconnection indicator transmission interrupt Mounting on plate or pole Operating temperature -40/+85°C Outdoor use yes Housing material Thermoplastic UL94-V0 Standards compliance IEC 61643-21 / EN 61643-21 / UL497B IEEE 802-3ab/3at Part number IP65 version CMJ8-POE-A-C5E 892002 CMJ8-POE-B-C5E 892003 IP66 version (reinforced seal) CGMJ8-POE-A-C5E 892004 CGMJ8-POE-B-C5E 892005

CMJ8-POE__F_F120205D.pdf

.: +33 1 41 23 50 23 • Fax: +33 1 41 23 50 09 • e-mail: contact@citel.fr • www.citel.fr DBCP LISTED CMJ8-POE-A CMJ8-POE-A/PCB 140 113 112 80 Fiche Technique Parafoudre extérieur pour POE (Power Over Ethernet) Gamme CMJ8-POE Caractéristiques F120205D • Document sujet à modification sans préavis P : Eclateur à gaz tripolaire DBC : Diode basse capacité Ligne Equipement • Pour liaisons POE • Pour application extérieure • Boîtiers plastique • IP 65 et IP 66 • Connecteurs RJ45 blindés • Courant de décharge 2 kA • Homologué UL497B Référence CITEL C*MJ8-POE-A-C5E C*MJ8-POE-B-C5E Description Parafoudre extérieur pour réseaux POE-A Parafoudre extérieur pour réseaux POE-B Réseau POE-A et Gigabit Ethernet, High POE POE-B et Gigabit Ethernet, High POE Débit maximal 1000 Mbps 1000 Mbps Configuration 8 fils + blindage 8 fils + blindage brochage (1-2)(3-6)(4-5)(7-8) (1-2)(3-6)(4-5)(7-8) Tension nominale de ligne Un 48 Vdc 5 Vdc/48 Vdc Tension et Courant max Uc 60 Vdc - 650 mA 7.5 Vdc (1.2.3.6) - 650 mA. 60 Vdc (4.5.7.8) - 650 mA Courant max de ligne IL 1200 mA 1200 mA Frequence max d’utilisation f max > 100 MHz > 100 MHz Perte d’insertion - @ fmax < 1 dB < 1 dB Courant de décharge nominal Ligne/Terre Test 8/20µs x 10 - catégorie C2 In 2000 A 2000 A Courant de décharge nominal Ligne/Ligne Test 8/20µs x 10 - catégorie C2 In 500 A 500 A Courant de choc - Test 10/350µs x 2 - catégorie D1 Iimp 500 A 500 A Niveau de protection Up 70 V 20/70 V Mise hors service de sécurité court-circuit court-circuit Caractéristiques mécaniques Circuit de remplacement CMJ8-POE-A-C5E/PCB CMJ8-POE-B-C5E/PCB Dimensions voir schéma Format Boitier plastique avec connecteurs entrée/sortie Raccordement au réseau connecteur blindé RJ45 femelle en entrée/sortie Fin de vie interruption de transmission Montage sur platine ou sur poteau Température de fonctionnement -40/+85°C Installation extérieure oui Boîtier Thermoplastique UL94-V0 Conformité aux normes IEC 61643-21 / EN 61643-21 / UL497B IEEE 802-3ab/3at Code Article version IP65 CMJ8-POE-A-C5E 892002 CMJ8-POE-B-C5 892003 version IP66 (étanchéité renforcée) CGMJ8-POE-A-C5 892004 CGMJ8-POE-B-C5 892005

I_CRMJ8-POE-C6_&_C6A_N200204b.pdf

Load current (IL) Cat5 / Cat6 Cat5 / Cat6 /Cat6A 1.2 A 2 A Mechanical Characteristics Replace complete protector unit or replace internal PCB and RJ45 connectors. X Input Output CRMJ8-POE-C6 POE A & B Surge Protector Input Output N200204b Input Output POE input Toward POE equipment PE Input Output Power + Ethernet = OK Min. pole size Max. pole size * 5 cm 20 cm If a larger pole diameter is used then use two pole kits in series * POE input Toward POE equipment PE Input Output P/N 1.97 inch 7.88 inch Fit protector as close as possible to the POE cable entry point into the building ** DEFECTIVE 13100 ft max. 4000 m max... Humidity range 5% to 95% CMJ8-POE-C6/PCB or CMJ8-POE-C6A/PCB 10 Gigabit Ethernet - CAT6A POE and Gigabit Ethernet 1000 Mbps 60 Vdc Ref. : CR-WM-KIT Code : 581532 Ref. : CR-PM-KIT Code : 581531 page SAFETY INSTRUCTIONS CONSIGNES DE SECURITE SICHERHEITSHINWEISE ADVERTENCIA DE SEGURIDAD AVVERTENZE IMPORTANTI WSKAZÓWKI BEZPIECZEŃSTWA VARNOSTA NAVODILA VEILIGHEIDSVOORSCHRIFTEN BEZPEČNOSTNÉ POKYNY SIKKERHEDSANVISNINGER SÄKERHETSANVISNINGAR AVISOS IMPORTANTES МЕРЫ БЕЗОПАСНОСТИ BEZPEČNOSTNÍ POKYNY 安全须知 WARNUNG ! ... - Svodič přepětí musí být vybrán podle aplikace a napěťové úrovně (tabulka 1). - Je-li signál přerušen, je svodič přepětí vadný a musí výt vyměněn.