Type 2 AC surge protector - 3-phase
DS73R-600
DS73R-600
Part Number: 321503
  • Re-inforced Type 2 AC Multipolar surge protector
  • In: 30 kA
  • Imax total: 210 kA
  • Pluggable module by phase
  • IEC 61643-11, EN 61643-11 compliance
  • UL1449 ed.4 appoved
Installation Sheet

DS70R type 2 AC surge protector are used mainly for primary protection of single and three-phase networks at the main electrical panel. They provide common-mode protection and are available in one-phase, single-phase, 3-phase and 3-phase+Neutral. This SPD is based on association of high energy varistors equipped with thermal disconnector and failure indicator, to comply with standards.

The DS70R surge protectors are designed to be used in a multipolar configuration to protect single-phase, 3-phase or 3-phase+N AC networks. Each pole of the SPD is connected between Line(s) and PE and Neutral and PE.



SPD type
following IEC test
2
Network
690 V 3-phase
AC system
TNC
Nominal line voltage
690 Vac
Max. AC operating voltage L-N
840 Vac
Temporary Over Voltage (TOV) Charasteristics - 5 sec.
without disconnection
700 Vac withstand
Temporary Over Voltage (TOV) Charasteristics - 120 mn
without disconnection or with safety disconnection
920 Vac disconnection
Residual Current
Leakage current to Ground
< 3 mA
Operating current
Continious current at Uc
< 1 mA
Follow current
None
Nominal discharge current
15 x 8/20 µs impulses
30 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
70 kA
Total Maximal discharge current
max. total withstand @ 8/20 µs
210 kA
Admissible short-circuit current
25000 A
Connection mode(s)
L/PE
Protection mode(s)
Common mode
Protection level L/PE
@ In (8/20µs)
1.8 kV
Technology MOV
SPD configuration 3-phase+PE
Connection to Network By screw terminals: 2.5-25 mm² / by bus
Format
Plug-in modular box
Mounting
Symmetrical rail 35 mm (EN60715)
Housing material Thermoplastic UL94-V0
Operating temperature -40/+85°C
Protection rating IP20
Failsafe behavior Disconnection
Disconnection indicator 2 mechanical indicators by pole
Spare module(s)
DSM70R-600
Dimensions
See diagram
Certification
EAC
Standards compliance
IEC 61643-11 / EN 61643-11 / UL1449 4ed.
Thermal disconnector Internal
Fuses
Fuses Type gG - 100 A
Installation ground fault breaker Type 'S' or delayed