Type 1 AC surge protector
Installation Sheet
Select another reference:
| SPD type following IEC test |
1+2 |
| Max. AC operating voltage L-N | 530 Vac |
| Max. load current |
100 A |
| Temporary Over Voltage (TOV) Charasteristics - 5 sec. without disconnection |
630 Vac withstand |
| Temporary Over Voltage (TOV) Charasteristics - 120 mn without disconnection or with safety disconnection |
930 Vac disconnection |
| Residual Current Leakage current to Ground |
< 2 mA |
| Follow current |
None |
| Nominal discharge current 15 x 8/20 µs impulses |
60 kA |
| Max. discharge current max. withstand @ 8/20 µs by pole |
140 kA |
| Impulse current by pole max. withstand 10/350µs by pole |
15 kA |
| Total lightning current max. total withstand @ 10/350µs |
45 kA |
| Admissible short-circuit current | 100000 A |
| Protection level @ In (8/20µs) |
3 kV |
| Specific energy by pole max. withstand 10/350 µs |
72 kJ/ohm |
| Mounting | Symmetrical rail 35 mm (EN60715) |
| Housing material | Thermoplastic UL94-V0 |
| Operating temperature | -40/+85°C |
| Protection rating | IP20 |
| Disconnection indicator | 3 mechanical indicators |
| Remote signaling of disconnection | Output on changeover contact |
| Dimensions |
See diagram |
| Standards compliance | IEC 61643-11 / EN 61643-11 / UL1449 4ed. |
| Certification | EAC |
| Thermal disconnector | Internal |
| Installation ground fault breaker | Type 'S' or delayed |
| Fuses |
Fuses Type gG - 125 A |
