RF coaxial protector - 2 GHz
P8AX25-T/MF
Part Number: 60304
  • RF coaxial surge protector
  • 2 GHz
  • 190 W
  • Connectors : TNC
  • Low insertion loss
  • Removale GDT
  • DC-pass
  • Bi-directional protection
Installation Sheet

The P8AX series is based on gas discharge tube (GDT) and designed for RF line surge protection. Available for different power and with coaxial connectors, P8AX units could be provide in feedthrough mounting version and with various impedance.



Max. load current
10 A
Max. frequency
DC-2 GHz
Insertion loss
< 0.2 dB
Residual Current
Leakage current to Ground
None
Max. discharge current
max. withstand @ 8/20 µs by pole
20 kA
Protection mode(s)
Common mode
Protection level
@ In (8/20µs)
< 750 V
Impulse current
2 x 10/350µs Test - D1 Category
1 kA
Nominal discharge current
8/20µs Test x 10 - C2 Category
5 kA
Impedance
50 ohms
Max Power
190 W
Return loss
> 20 dB
VSWR
<1.2:1
DC Pass True
Insulation resistance
≥10 GOhms
Technology Gas discharge tube
Connection to Network Connector TNC Male/Female
Mounting
Feedthrough
Housing material Brass/Surface plating : Cu Zn Sn
Operating temperature -40/+85°C
Protection rating IP66
Outdoor application
Yes
Failsafe behavior Short-circuit
Disconnection indicator Transmission interrupt
Spare module(s)
BBHF-250V
Dimensions
See diagram
Contacts
Bronze/Surface Au-Ag
Insulation material PTFE
RohS compliance
Yes
Standards compliance
IEC 61643-21 / EN 61643-21 / UL497C / UL497E