Coaxial surge protector DC-3.5 GHz
P8AX15-N/MF
Part Number: 60002
- RF coaxial surge protector
- 3.5 GHz
- Connectors : N
- Low insertion loss
- Removale GDT
- DC-pass
- Bi-directional protection
Installation Sheet
The P8AX series is based on gas discharge tube (GDT) and designed for RF line surge protection.
Available for different power and with coaxial connectors, P8AX units could be provide in feedthrough mounting version and with various impedance.
Select another reference:
- P8AX09-716/FF
- P8AX09-716/MF
- P8AX09-B/FF
- P8AX09-B/MF
- P8AX09-F/FF
- P8AX09-F/MF
- P8AX09-N/FF
- P8AX09-N/MF
- P8AX09-SMA/FF
- P8AX09-SMA/MF
- P8AX09-T/FF
- P8AX09-T/MF
- P8AX15-B/FF
- P8AX15-B/MF
- P8AX15-N/FF
- P8AX15-N/MF
- P8AX15-SMA/FF
- P8AX15-SMA/MF
- P8AX25-716/FF
- P8AX25-716/MF
- P8AX25-B/FF
- P8AX25-B/MF
- P8AX25-F/FF
- P8AX25-F/MF
- P8AX25-N/FF
- P8AX25-N/MF
- P8AX25-SMA/FF
- P8AX25-SMA/MF
- P8AX25-T/FF
- P8AX25-T/MF
- P8AX50-716/FF
- P8AX50-716/MF
- P8AX50-B/FF
- P8AX50-B/MF
- P8AX50-N/FF
- P8AX50-N/MF
- P8AX50-T/FF
- P8AX60-N/FF
| Max. load current | IL | 10 A |
| Frequency range | f | DC-3.5 GHz |
| Insertion loss | < 0.2 dB | |
| Residual Current | Ipe | None |
| Max. discharge current | Imax | 20 kA |
| Protection mode(s) | Common mode | |
| Protection level | Up | < 700 V |
| Impulse current | Iimp | 1 kA |
| Nominal discharge current | In | 5 kA |
| Impedance | 50 ohms | |
| Max Power | 70 W | |
| Return loss | > 20 dB | |
| Typical let through energy | 320 µJ | |
| VSWR | <1.2:1 | |
| DC Pass | ZERTZAERTZERTZER | True |
| Insulation resistance | ≥10 GOhms |
| Technology | Gas discharge tube | |
| Connection to Network | connector N Male/Female | |
| Mounting | Feedthrough | |
| Housing material | Brass/Surface plating : Cu Zn Sn | |
| Operating temperature | -40/+85°C | |
| Protection rating | IP66 | |
| Outdoor application | Yes | |
| Failsafe mode | Short-circuit | |
| Disconnection indicator | Transmission interrupt | |
| Spare module(s) | BBHF-150V | |
| Dimensions | See diagram | |
| Contacts | Bronze/Surface Au-Ag | |
| Insulation material | PTFE |
| Standards compliance | IEC 61643-21 / EN 61643-21 / UL497C / UL497E | |
| RohS compliance | Yes |
