RJ45 surge protector for cat.6 network
MJ8-CAT6
Part Number: 6149
- CAT6 networks surge protector
- 10/100/1000BaseT compatible
- RJ45 connector
- Bi-directional
Datasheet
The MJ8-CAT6 surge protector is designed to protect data processing equipment, connected to twisted pair Ethernet 10 to 1000 Mbit/s network
Featured with in/out RJ45 connectors.
Select another reference:
| Network | 10 Gigabit Ethernet, Cat.6 cabling | |
| Nominal line voltage | Un | 5 Vdc |
| Max. DC operating voltage | Uc | 7.5 Vdc |
| Max. frequency | f max. | > 250 MHz |
| Max. data rate | 10 Gbps | |
| Insertion loss | < 1 dB | |
| Max. load current | IL | 1000 mA |
| Protection level | Up | 20 V |
| Max. capacitance | C | < 25 pF |
| Impulse current | Iimp | 150 A |
| Discharge current | 130 A | |
| Line/Line Nominal discharge current | In L/L | 500 A |
| Line/Ground Nominal discharge current | In L/PE | 500 A |
| Technology | Diode écrêtage | |
| SPD configuration | 4 pairs | |
| Connection to Network | RJ45 cord male input/output | |
| Format | RJ45 cord | |
| Mounting | Mounting flange,Screw lug, DIN Rail | |
| Housing material | Thermoplastic UL94 V-0 | |
| Operating temperature | Tu | -40/+85°C |
| Protection rating | IP20 | |
| Failsafe mode | Short-circuit | |
| Disconnection indicator | Transmission interrupt | |
| Pinout | (1-2)(3-6)(4-5)(7-8) | |
| Dimensions | See diagram |
| Standards compliance | IEC 61643-21 / EN 61643-21 / UL497 B / IEEE 802-3an |
