Contact : 01 41 23 50 35 (9h - 17h)

DC power surge protector - 95 Vdc

DS210-95DC
Part Number: 441001
DS210-95DC
  • Surge protector for DC supplies
  • 95 Vdc
  • Imax: 6 kA
  • Pluggable module
  • Operating indicator
  • IEC 61643-11, EN 61643-11 and UL1449 ed.5 compliance
Contact Us
DS210-DC surge protectors are designed to protect equipment connected to DC (and AC) power supplies from lightning surges. It is based on varistors matched to the network voltage: the varistors have thermal disconnection devices to control any end-of-life. These SPD are DIN rail compatible and is connected in parallel on the line to be protected.
SPD type 2 (or 3)
Network DC network 95 Vdc
Nominal DC voltage Un-dc 95 Vdc
Max. AC operating voltage Uc 75 Vac
Max. DC operating voltage Uc 100 Vdc
Max. load current IL 20 A
Residual Current Ipe < 0.1 mA
Operating current Ic < 0.1 mA
PV Permanent Operating current Icpv < 0.1 mA
Follow current If None
Nominal discharge current In 2 kA
Max. discharge current Imax 6 kA
Total Maximum discharge current Imax Total 6 kA
Current withstand short circuit PV Iscpv 1000 A
Connection mode(s) +/-/PE
Protection mode(s) Common/Differential mode
Protection level +/PE (-/PE) Up 300 V
Technology MOV
SPD configuration 2-poles
Connection to Network By screw terminals: 1.5-10mm² (actives wires) and 2.5-25mm² (ground)
Format Plug-in modular box
Mounting Symmetrical rail 35 mm (EN 60715)
Housing material Thermoplastic UL94 V-0
Operating temperature Tu -40/+85°C
Protection rating IP20
Outdoor application No
Failsafe mode Disconnection from DC network
Disconnection indicator Green LED(s) OFF
Spare module(s) DSM210-95DC
Dimensions See diagram
Standards compliance IEC 61643-11 / EN 61643-11 / UL1449 ed.5
Thermal disconnector Internal
Fuses Fuses type gG - 10 A