DC power surge protector - 48 Vdc
DS210-48DC
Part Number: 440401
- Surge protector for DC supplies
- 48 Vdc
- Imax : 2 kA
- Pluggable module
- Operating indicator
- IEC 61643-11, EN 61643-11 y UL1449 ed.4
Datasheet
DS210-DC surge protectors are designed to protect equipment connected to DC (and AC) power supplies from lightning surges.
It is based on varistors matched to the network voltage: the varistors have thermal disconnection devices to control any end-of-life.
These SPD are DIN rail compatible and is connected in parallel on the line to be protected.
Select another reference:
| SPD type | 2 (or 3) | |
| Network | DC network 48 Vdc | |
| Nominal line voltage | Un | 48 Vdc |
| Nominal DC voltage | Un-dc | 48 Vdc |
| Max. AC operating voltage L-N | Uc | 40 Vac |
| Max. DC operating voltage | Uc | 56 Vdc |
| Max. load current | IL | 20 A |
| Residual Current | Ipe | < 0.1 mA |
| Operating current | Ic | < 0.1 mA |
| PV Permanent Operating current | Icpv | < 0.1 mA |
| Follow current | If | None |
| Nominal discharge current | In | 2 kA |
| Max. discharge current | Imax | 6 kA |
| Total Maximum discharge current | Imax Total | 2 kA |
| Current withstand short circuit PV | Iscpv | 1000 A |
| Connection mode(s) | +/-/PE | |
| Protection mode(s) | Common/Differential mode | |
| Protection level +/PE (-/PE) | Up | 180 V |
| Technology | MOV | |
| SPD configuration | 2 poles | |
| Connection to Network | By screw terminals: 1.5-10mm² (actives wires) and 2.5-25mm² (ground) | |
| Format | Plug-in modular box | |
| Mounting | Symmetrical rail 35 mm (DIN 60715) | |
| Housing material | Thermoplastic UL94 V-0 | |
| Operating temperature | Tu | -40/+85°C |
| Protection rating | IP20 | |
| Failsafe mode | disconnection from DC line | |
| Disconnection indicator | Green led off | |
| Spare module(s) | DSM210-48DC | |
| Dimensions | See diagram | |
| Weight | 0.093 kg |
| Standards compliance | IEC 61643-11 / EN 61643-11 / UL1449 4ed. |
| Thermal disconnector | internal | |
| Fuses | Fuses type gG- 10 A |
