Type 1+2 AC surge protector - 3-phase+N
DS134R-320
Part Number: 571904
- Type 1 + 2 AC multipolar surge protector
- In : 20 kA
- Iimp total : 50 kA
- Pluggable module for each phase
- Remote signaling (option)
- EN 61643-11, IEC 61643-11 compliance
Installation Sheet
The DS130R is an extreme duty Type 1+2 designed to protect the entrance of the electrical installation.
The DS130R is a one-pole SPD and can be used in common mode or common and differential mode.
DS130R AC surge protectors are designed to be connected in multi-pole configuration to protect single-phase, 3-phase and 3-phase+neutral AC networks.
This SPD is DIN rail compatible.
Select another reference:
| SPD type | 1+2 | |
| Network | 230/400 V 3-phase+N | |
| AC system | TN | |
| Nominal line voltage | Un | 230 Vac |
| Max. AC operating voltage L-N | Uc | 320 Vac |
| Temporary Over Voltage (TOV) Charasteristics - 5 sec. | UT | 335 Vac withstand |
| Temporary Over Voltage (TOV) Charasteristics - 120 mn | UT | 440 Vac disconnection |
| Follow current | If | None |
| Nominal discharge current | In | 20 kA |
| Max. discharge current | Imax | 50 kA |
| Impulse current by pole | Iimp | 12.5 kA |
| Total lightning current | Itotal | 50 kA |
| Withstand on overvoltages IEEE C62.41.1 | 20 kV | |
| Specific energy by pole | W/R | 40 kJ/ohm |
| Connection mode(s) | L/PE and N/PE | |
| Protection mode(s) | Common mode | |
| Protection level L/PE | Up L/PE | 1.6 kV |
| Admissible short-circuit current | Isccr | 25000 A |
| Technology | MOV | |
| SPD configuration | 3-phase+Neutral | |
| Connection to Network | By screw terminals: 2.5-25 mm² / by bus | |
| Format | Plug-in modular box | |
| Mounting | Symmetrical rail 35 mm (DIN 60715) | |
| Housing material | Thermoplastic UL94-V0 | |
| Operating temperature | -40/+85°C | |
| Protection rating | IP20 | |
| Failsafe mode | Disconnection | |
| Disconnection indicator | 1 mechanical indicator by pole | |
| Spare module(s) | DSM130R-320 | |
| Remote signaling of disconnection | option DS134RS-320 : output on changeover contact | |
| Dimensions | See diagram | |
| Weight | 0.629 kg |
| Standards compliance | IEC 61643-11 / EN 61643-11 / UL1449 4ed. | |
| Certification | EAC / TUV |
| Thermal disconnector | Internal | |
| Installation ground fault breaker | Type 'S' or delayed | |
| Fuses | Fuses Type gG - 125 A |
