Type 1+2 AC surge protector - 1-pole
DAC1-13VG-10-275
Part Number: 821730211
- Type 1 + 2 + 3 AC surge protector
- VG Technology
- In : 20 kA
- Iimp : 12.5 kA on 10/350µs impulse
- No leakage current
- Pluggable module for each phase
- Remote signaling (option)
- Optimized to TOV
- EN 61643-11, IEC 61643-11 and UL1449 ed.4 compliance
Installation Sheet
The DAC1-13VG is an extreme duty pluggable Type 1+2+3 SPD designed to protect AC powerline at the main switchboard of an installation equipped with lightning rod.
Equipped with exclusive CITEL’s VG technology, the range achieves an high protection level, guaranteeing a maximum protection efficiency, a absence of follow and leakage currents, a simplification of use (no additional lightning arrester required) and a maximum lifetime.
The DAC1-13VG surge protectors are especially compact and available in multipolar versions to protect single or 3-phase AC networks, which makes them the best surge protection solution for Type 1 requirements.
Select another reference:
- DAC1-13VG-10-150
- DAC1-13VG-10-275
- DAC1-13VG-10-320
- DAC1-13VG-11-150
- DAC1-13VG-11-275
- DAC1-13VG-11-320
- DAC1-13VG-20-150
- DAC1-13VG-20-275
- DAC1-13VG-20-320
- DAC1-13VG-30-150
- DAC1-13VG-30-275
- DAC1-13VG-30-320
- DAC1-13VG-31-150
- DAC1-13VG-31-275
- DAC1-13VG-31-320
- DAC1-13VG-40-150
- DAC1-13VG-40-275
- DAC1-13VG-40-320
| SPD type | 1+2+3 | |
| Max. AC operating voltage L-N | Uc | 275 Vac |
| Temporary Over Voltage (TOV) Charasteristics - 5 sec. | UT | 335 Vac withstand |
| Temporary Over Voltage (TOV) Charasteristics - 120 mn | UT | 440 Vac withstand |
| Residual Current | Ipe | None |
| Follow current | If | None |
| Nominal discharge current | In | 20 kA |
| Max. discharge current | Imax | 50 kA |
| Impulse current by pole | Iimp | 12.5 kA |
| Withstand on Combination waveform IEC 61643-11 | Uoc | 6 kV |
| Specific energy by pole | W/R | 40 kJ/ohm |
| Protection level | Up | 1.5 kV |
| Residuel voltage at 5 kA | Up-5kA | 0.7 kV |
| Admissible short-circuit current | Isccr | 50 000 A |
| Technology | VG | |
| SPD configuration | 1-pole | |
| Connection to Network | By screw terminals: 2.5-25 mm² (35 mm² rigid) | |
| Format | Plug-in modular box | |
| Mounting | Symmetrical rail 35 mm (EN60715) | |
| Housing material | Thermoplastic UL94-V0 | |
| Operating temperature | -40/+85°C | |
| Protection rating | IP20 | |
| Failsafe mode | Disconnection from AC network | |
| Disconnection indicator | Mechanical indicator Green/Red | |
| Spare module(s) | MDAC1-13VG-275 | |
| Remote signaling of disconnection | option DAC1-13VGS-10-275: output on changeover contact | |
| Wiring for remote signaling | 1.5 mm² max. | |
| Maw. Voltage/Current for remote signaling | 250 V / 0.5 A (AC) / 30 V / 3 A (DC) | |
| Dimensions | See diagram - 1TE (EN43880) |
| Standards compliance | IEC 61643-11 / EN 61643-11 / UL1449 4ed. | |
| Certification | IEC 61463-11 / EN 61643-11 |
