Type 1+2 AC surge protector - 3-phase+N
DAC1-13-31-275
DAC1-13-31-275
Part Number: 821710234
  • Type 1 + 2 AC multipolar surge protector
  • In : 20 kA
  • Iimp: 12,5 kA
  • Pluggable module for each phase
  • Remote signaling (option)
  • EN 61643-11, IEC 61643-11 compliance

The DAC1-13 is an extreme duty Type 1+2 pluggable SPD designed to protect AC powerline at the main switchboard of an installation equipped with lightning rod.

The technology ‘Multi-varistor” allows a very high discharge current capability in small dimensions and the best possible behavior to the AC network (no follow current).

Despite their high discharge capability, the DAC1-13 surge protectors are especially compact and are available in multipolar versions to protect single or 3-phase AC networks.



SPD type
follow test IEC 61643-11
1+2
Network
230/400 V 3-phase+N
AC system
TT-TNS
Max. AC operating voltage L-N 440 Vac
Temporary Over Voltage (TOV) Charasteristics - 5 sec.
without disconnection
335 Vac withstand
Temporary Over Voltage (TOV) Charasteristics - 120 mn
without disconnection or with safety disconnection
440 Vac disconnection
Temporary Over Voltage N/PE (TOV HT)
without disconnection or with safety disconnection
1200 V/300A/200 ms withstand
Operating current
Continious current at Uc
none
Follow current
none
Nominal discharge current
15 x 8/20 µs impulses
20 kA
Max. discharge current
max. withstand @ 8/20 µs by pole
50 kA
Impulse current by pole
max. withstand 10/350µs by pole
12.5 kA
Total lightning current
max. total withstand @ 10/350µs
50 kA
Withstand on overvoltages IEEE C62.41.1 20 kV
Admissible short-circuit current 50000 A
Connection mode L/N and N/PE
Protection mode(s)
Commun/Differential mode
Protection level
@ In (8/20µs) between L/PE
.
Protection level L/N
@ In (8/20µs)
1.3 kV
Protection level N/PE
@ In (8/20µs)
1.5 kV
Specific energy by pole
max. withstand 10/350 µs
40 kJ/ohm
 
Technology MOV
SPD configuration 3-phase+Neutral
Connection to Network by screw terminals: 2.5-25 mm²
Format Plug-in modular box
Mounting Symmetrical rail 35 mm (EN60715)
Housing material Thermoplastic UL94-V0
Operating temperature -40/+85°C
Protection rating IP20
Outdoor application
False
Failsafe behavior Disconnection
Disconnection indicator 1 mechanical indicator by pole
Spare module MDAC1-13-275
Remote signaling of disconnection option DAC1-13S-31-275 : output on changeover contact
Dimensions
see diagram
Standards compliance IEC 61643-11 / EN 61643-11 / UL1449 4ed.
Certification -
Thermal disconnector internal
Installation ground fault breaker Type 'S' or delayed
Fuses
Fuses Type gG - 125 A